1974999

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	10mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-26 AWG
Series:	COMBICON FKCS
Current - UL:	10A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Leg Spring, Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.197" (5.00mm)
Number of Levels:	1
Positions Per Level:	9
Number of Positions:	9
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks – Headers, Plugs and Sockets are generally used in industrial applications for electrical or electromechanical assemblies. They can be used for a variety of applications including the electrical power distribution, electrical wiring of substations, transmitters and receivers, control systems, and even in the home.Terminal blocks are generally composed of two pieces, connectors and socket assemblies. The connectors are used to connect multiple electrical components, while the socket assemblies are used to hold the components in place. The connectors are generally made from copper, brass, or other non-corrosive metals, while the socket assemblies are generally made from plastic. The use of plastics increases the insulation and can provide a better overall connection.The principle of operation for Terminal blocks – Headers, Plugs and Sockets is simple. Each electrical component is connected to a terminal and either to the corresponding socket or wire. When the power is supplied, the current will travel from the socket to the component and then back to the socket, creating a complete circuit. This allows for a high degree of current passing through the components to power them.As these components are used in industrial settings, they are often subjected to high temperature and corrosive substances, so they must be engineered to withstand the environment. A good terminal block should be designed to be corrosion resistant and strong enough to handle high levels of power. It should also be rated for a particular voltage and designed with a thermal protection system to avoid accidents.Terminal blocks are manufactured in a variety of sizes and shapes for different electrical applications. The size of the terminal block depends mostly on the amount of current passing through it. The type of connection should also be taken into consideration, such as whether the connection is made with a plug or socket. The socket type is typically used for applications with low current while the plug type is intended for higher current applications.Terminal blocks – Headers, Plugs and Sockets are a cost-effective and reliable solution for a variety of electrical applications. They are designed to be strong and corrosion resistant, and can help protect against electrical accidents. By using the correct type of connection, these components can provide a reliable and long-lasting connection between electrical components. They are also easy to install and require minimal maintenance. Their small size also allows for a more efficient use of space and allows for easier installation in tight spaces.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description