1A6TA

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	800V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	5µA @ 800V
Capacitance @ Vr, F:	15pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	R-1 (Axial)
Supplier Device Package:	R-1
Operating Temperature - Junction:	-65°C ~ 125°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

1A6TA is an acronym for the semiconductor device known as a single rectifier. It is a single dielectric barrier, which is a type of diode with a single rectifying junction. It is used in many applications, and is primarily used to convert alternating current (AC) to direct current (DC). By doing this, 1A6TA can be employed in a variety of applications in various fields such as power-conditioning and AC/DC power conversion.

Components

The 1A6TA is made up of two components: a semiconductor substrate and an insulation layer. The semiconductor substrate is the substrate which the device is fabricated on. It is made of a material such as silicon and is usually treated with an impurity to form a p-type or n-type material. The insulation layer is made of a thin layer of insulating materials such as polysilicon, oxide, nitride, etc. This layer helps to prevent current leakage from occurring.

Application Fields

1A6TA rectifiers are primarily used in power conditioning and AC/DC power conversion. In power conditioning applications, 1A6TA is used to convert alternating current (AC) to direct current (DC). This allows for the power to be input into devices that require DC power. It can also be used in AC/DC power conversion applications, such as in the charging of batteries or when converting AC to DC for consumer electronics. Another common application for 1A6TA rectifiers is in motor control circuits. These rectifiers can be used to control the speed of the motor, by differentially controlling the current input. It can also be used to protect the motor from high voltages and current surges.

Working Principle

The working principle of 1A6TA rectifiers is based on the P-N junction diode. When a voltage is applied to the P-N junction diode, current flows in one direction. If the applied voltage is in the forward bias direction, the current flow is unrestricted, otherwise, the current flow is said to be reversed biased. In a 1A6TA rectifier, the junction is reverse biased, and therefore, current does not flow through the device. However, when AC voltage is applied to the 1A6TA rectifier, current flows into the anode of the device and is rectified into a DC output.

Conclusion

The 1A6TA is a single rectifier device which is primarily used for power conditioning and AC/DC power conversion applications. It is made up of two components, a semiconductor substrate and an insulation layer, and works on the principle of a P-N junction diode. The rectifier is also used in a variety of other applications such as motor control and battery charging. The 1A6TA is an integral part of many electronic systems, due to its reliability, cost-effectiveness and wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description