Allicdata Part #: | 1920-1603-ND |
Manufacturer Part#: |
1BU3R |
Price: | $ 10.81 |
Product Category: | Circuit Protection |
Manufacturer: | Altech Corporation |
Short Description: | CIR BRKR THRM-MAG 3A LEVER |
More Detail: | N/A |
DataSheet: | 1BU3R Datasheet/PDF |
Quantity: | 23 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 9.82800 |
5 +: | $ 9.07200 |
10 +: | $ 8.31600 |
50 +: | $ 7.18200 |
100 +: | $ 6.04800 |
250 +: | $ 5.67000 |
500 +: | $ 5.10300 |
1000 +: | $ 4.91400 |
Series: | R |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Breaker Type: | Thermal Magnetic |
Moisture Sensitivity Level (MSL): | -- |
Current Rating: | 3A |
Voltage Rating - AC: | 480V |
Number of Poles: | 1 |
Actuator Type: | Lever |
Illumination: | None |
Illumination Voltage (Nominal): | -- |
Mounting Type: | DIN Rail |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Circuit Breakers
A circuit breaker is an electrical device designed to quickly and automatically disconnect a circuit when too much current flowing through it will cause harm to the circuit. The purpose is to protect the circuit from damage due to an overload or short circuit. Some circuit breakers also temporarily interrupt a circuit during periods when it operates normally, but at an unusually high level of pressure or current.
1BU3R is a type of circuit breaker that is used to protect electric motors operating at high loads. It is a general-purpose, adjustable device that quickly disconnects the supply line from the motor in order to protect the motor from damage due to overloads or overheating.
The 1BU3R circuit breaker is designed to operate in three stages. In the first stage, it senses the amount of current that the motor is receiving. If the current is too high, the device will trip, which will cause the circuit breaker to open, disconnecting the electric motor from the supply line. In the second stage, the device will lock out the power on the electric motor by preventing it from receiving any more electric power until an acceptable level of current is reached. Finally, in the third stage, the device will reset itself and allow the motor to be reconnected once an acceptable level of current is reached.
The 1BU3R circuit breaker is designed to ensure that the motor will not be damaged due to an overload or short circuit. This is achieved by automatically adjusting the amount of current that is allowed to flow through the motor. The device also monitors the amount of electricity that the motor is receiving and will trip when the motor is operating at an abnormally high level. This will prevent the motor from being damaged due to overheating or overvoltage.
In addition to protecting the motor from damage due to overloads and short circuits, the 1BU3R circuit breaker can also be used to protect other electrical equipment from damage due to overvoltage or overheating. The device can be used to disconnect an electric motor from a high-voltage distribution system if it is operating at a higher level than is safe for the motor. The device can also be used to limit the voltage or current for other sensitive electronic devices.
The 1BU3R circuit breaker is an essential device to have in any industrial or commercial facility that uses electric motors or other sensitive electrical equipment. It is designed to ensure that the motor is protected from damage due to overloads and short circuits. It can also be used to protect other electrical equipment from damage due to high voltage or current.
The specific data is subject to PDF, and the above content is for reference
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A