1D4DL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

One of the most widely used types of circuit breakers in the industry is the 1-D-4-D-L. The 1-D-4-D-L offers excellent protection and convenience for a wide range of applications. This article will discuss the 1-D-4-D-L application field and working principle.

The 1-D-4-D-L circuit breaker is designed for a variety of low, medium and high voltage applications and provides an efficient protection against short circuits and overload currents for power systems. It is widely used in industrial, commercial and residential applications. The 1-D-4-D-L circuit breaker is also suitable for use in hazardous and hazardous-industrial locations, where it provides an additional level of protection against the safe operation of equipment.

The 1-D-4-D-L circuit breaker is composed of four main parts: a contactor casing, a pressure switch, a trip unit, and a field winding. The contactor casing is a hollow metal shell which houses all the components of the breaker. It also serves as an arc barrier to prevent the arc flash produced by the breaker from reaching the outside of the casing. The pressure switch is a spring-loaded contact which switches the breaker on and off depending on pressure changes inside the casing. The trip unit is an electronic device which determines when the fault current is above a certain level. When this occurs, it automatically trips the breaker and disconnects the circuit.

The field winding is the electricity-carrying wire that carries the power from the contactor casing to the trip unit. It is usually made of steel or copper and it is insulated from the contactor casing to prevent any arcing. When the fault current is detected, the trip unit sends a signal to the field winding to trip the breaker. The field winding has two separate coils which are connected in series when the breaker is in the on state. When the fault current is detected, the magnetic field created by these two coils repels each other, thus tripping the breaker.

The working principle of the 1-D-4-D-L circuit breaker is relatively simple and straightforward. When the breaker is in the on state, the contactor casing is filled with compressed air or vapor, and the pressure contacts act as a switch to turn the breaker off or on. When the fault current is detected, the trip unit sends a signal to the field winding to trip the breaker. This action causes the field winding to generate a magnetic field which will repel the two coils, leading to the breaker tripping.

The 1-D-4-D-L circuit breaker provides excellent protection against overloads and short circuits. It is reliable, efficient, and its design allows for both manual and automatic operation. Its simple design and easy installation make it one of the most popular and widely used circuit breakers in the industry. It is highly recommended for a wide range of residential, commercial, industrial and hazardous applications.

The specific data is subject to PDF, and the above content is for reference