1EDC05I12AHXUMA1 Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Isolators – Gate Drivers

Isolators are an important component and serve an important purpose in part of any modern electronics system, most commonly those which employ semiconductor circuitry. They are devices used to isolate the signal being sent between a driver and receiver, preventing unintentional or undesired interactions. Examples include integrated circuit isolators and fibre-optic isolators. The 1EDC05I12AHXUM-A1 is an example of the former; a non-isolated gate driver which is designed for use in a very small number of applications.

The 1EDC05I12AHXUM-A1 was developed to provide a simple, easy to integrate and reliable isolation solution. It has a common source drain configuration with two control pins, input and output, and is a monolithic integrated circuit design. It can operate in a frequency range of 100kHz-1kHz and has a maxim amplitude of 5V. It is also low noise, making it ideal for applications such as LED lighting and automotive lighting.

The 1EDC05I12AHXUM-A1 is able to provide a good isolation between the gate driver and the load, ensuring that any voltage spikes from the supply are not passed directly through to the load, and that any current density ripple caused by the driver is minimised.

The 1EDC05I12AHXUM-A1 has two control pins; the input pin to input a voltage and the output pin to output a voltage. A voltage is applied to the input pin and the output pin is then driven to the corresponding voltage. To ensure maximum isolation, .the voltage output from the driver is limited to 5V. The device also has an internal voltage regulator which can be used to limit the voltage to a set level between 1V and 4.5V.

The 1EDC05I12AHXUM-A1 is a very specific kind of gate driver, designed to be used in applications which require isolation between the driver and the load. It can be used for LED lighting, automotive lighting, and other high power switching applications where isolation is required. The device is very low noise and provides reliable isolation while also limiting the voltage to a maximum of 5V.

The specific data is subject to PDF, and the above content is for reference