1EDC60I12AHXUMA1 Isolators

Isolators - Gate Drivers

The 1EDC60I12AHXUMA1 is an isolator-gate driver used in various electronic applications. Isolation gate drivers are used to provide electrical isolation between two isolated circuits, take high currents between them, and provide low-frequency electrical signals or data between them. A driver acts to take the relatively low power signal from a controller and use it to power higher-power, high-voltage components such as motors, relays, and switches.

The 1EDC60I12AHXUMA1 isolator driver uses high-voltage MOSFET technology with an integrated logic voltage regulator. It has an input-to-output isolation distance of up to 25mm, an insulation resistance of up to 1012 ohm, and a voltage isolation level of up to 10kV. The device also has under-voltage protection, over-voltage protection, and over-temperature protection.

The 1EDC60I12AHXUMA1 provides low-power, high-speed signal isolation with a maximum switching frequency of up to 35MHz. It can support peak currents up to 2.5A when driven from low voltage logic levels. The device is also optimized for fast switching over-voltage and over-temperature protection.

The 1EDC60I12AHXUMA1 has a wide range of applications, including motor control, medical imaging equipment, industrial automation systems, power tools, HVAC systems, and power electronics. It is typically used as an interface between two isolated circuits, and allows for both high-current and low-power operation. It is used to protect both the controller and the power drive circuit being controlled, and is particularly suitable for applications such as motor control, process control, and security systems.

In motor control applications, the 1EDC60I12AHXUMA1 is typically used as the interface between the low-voltage logic signals driving motor control and the high-voltage switching circuitry. It provides a reliable, safe, and cost-effective solution that is easy to integrate into existing systems. In medical imaging equipment, it can be used as an interface between the low-voltage logic signals and the high-voltage circuits necessary to move the imaging components. In industrial automation systems, it can be used to provide robust isolation between the industrial control system and the high-power actuators.

The 1EDC60I12AHXUMA1 offers high performance and reliability, making it an ideal choice for applications requiring high-powered, reliable, low-power signalling. It is also easy to integrate into existing systems, and offers a cost-effective solution for protecting both the controller and the power drive circuit being controlled.