1N3879

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N3879 diode is one of the most widely used rectifiers in the world. It is a single component component used in a variety of applications, with a high efficiency and low cost that make it ideal for use in a variety of projects.

The 1N3879 is a full-wave rectifier, meaning that it can convert both positive and negative portions of an alternating current (AC) signal into a direct current (DC) signal. It is made up of two individual diodes, connected in a bridge configuration to the device’s terminals. The diodes allow current to flow in one direction only and prevent current from flowing in the opposite direction, which ensures that the full-wave rectified signal has a consistent DC output.

The 1N3879 is typically used as a power rectifier, to convert AC power from a wall outlet or other source of AC power into usable DC power. This application works by allowing a small amount of high current to pass through the diode and converting it into a steady DC output. The result is power that is suitable for powering electrical components or systems that require DC power, such as motors, fans, and LEDs.

The 1N3879 can also be used in AC to DC switching applications, where it is used to switch between AC and DC power. In this application, the 1N3879 rectifies an AC voltage into a DC voltage, allowing it to be used to switch between AC and DC power sources. This helps to ensure that the load connected to the circuit is always powered with the right type of power.

The 1N3879 can be used in other AC to DC applications, such as rectifying the AC waveform of AC-powered audio systems. In this type of application, the 1N3879 rectifies the AC voltage waveform, allowing it to be used to control the gain of the audio system. This helps to ensure that the audio system will produce a clear, consistent sound without distortion or noise.

The 1N3879 is also used in AC to DC power supplies, such as those used in battery chargers and electronic equipment. In this application, the 1N3879 rectifies an alternating current into a steady DC voltage, allowing it to be used to keep a battery or other device powered. In addition, many AC to DC battery chargers use the 1N3879 in their power supplies, in order to ensure that the batteries are receiving the right type of power.

The 1N3879 is also used in AC-powered inverter circuits, and this application typically requires two 1N3879s. An inverter circuit is used to convert AC voltage into DC voltage, and the two 1N3879s are used as switches, allowing the inverter to switch between AC and DC power sources. This helps to ensure that the output of the inverter is always a steady DC voltage and will not fluctuate or be affected by variations in the power source.

The 1N3879 is not only popular for its efficiency and low cost, but also for its ease of use. The 1N3879 is easy to install, and can be used in a wide variety of applications. Therefore, the 1N3879 is ideally suited for a range of different projects and applications.

The specific data is subject to PDF, and the above content is for reference