1N3893AR

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

1N3893AR is a silicon rectifier diode, which is mainly used for rectifying and isolation applications in power specific applications, such as industrial, automotive and commercial electronics. Its diode construction is capable of handling maximum surge current, this allows the device to have minimal power dissipation and ultra-low forward voltage drop compared to other diode types.

Device Characteristics

1N3893AR comes in a standard DO-41 package, which helps protect the environment from hazardous waste. The device is designed for use in high frequency power circuits, such as welding rectifier circuits, voltage multipliers and alarms. The device has excellent thermal and electrical characteristics, with a high maximum operating temperature of +150°C and a high maximum forward surge current. The device also has a low forward voltage drop of 0.6V and a maximum reverse current of 100µA.

Application Field

1N3893AR can be used in a wide range of power related applications. In industrial applications, the device can be used in motor drives, weld controllers, motor starters, rectifiers and motor control circuits. In automotive applications, the diode can be used in ignition circuits, alternator regulators and battery chargers. In commercial electronics options, the device can be used in DC-DC converters, AC-DC converters, LED drivers, buck-boost converters and LED drivers.

Working Principle

The 1N3893AR rectifier works by allowing current to flow in one direction and blocking current flow in the opposite direction. When used in a circuit, it will transmit an AC signal through the diode and convert it into a DC signal. This is achieved by blocking current from flowing backwards from the diode and allowing current to flow forwards. The diode then converts the AC signal into a DC signal. The 1N3893AR diode can be used in both half-bridge and full-bridge rectifier circuits. In a half-bridge circuit, two diodes are connected between the two power nodes, and a voltage is applied across the circuit. The applied voltage creates a DC current flow in one direction and blocks any current from flowing in the other direction. In a full-bridge circuit, four diodes are used to convert the alternating voltage into a DC voltage. The diodes are connected in a bridge configuration, and the applied voltage creates a current flow through the bridge. This current is then converted into a DC voltage by the diodes blocking current from flowing in the opposite direction.

Conclusion

In conclusion, the 1N3893AR silicon rectifier diode is a reliable and dependable device, which is primarily used in power related applications. The device provides excellent electrical and thermal characteristics, helping to reduce power dissipation and forward voltage drop. The 1N3893AR diode can be used in both half-bridge and full-bridge rectifier circuits, allowing the conversion of AC signals into DC signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description