1N4709 (DO35)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N4709 diode, otherwise known as a DO35, is a single zener diode that can be used for numerous applications. This type of diode can be invaluable for providing protection against unwanted transients in electronic circuits.

The DO35 or 1N4709 is designed to act as a voltage limiter when placed in series with a voltage source and is of the Zener type. A Zener diode is a form of a diode that is designed to provide breakdown and clamp voltage within a circuit. The diode acts as a voltage regulator and limits the influence of a Voltage Transient above the Zener Voltage. In this way the Diode can protect components in the circuit from the potential destruction caused by a Voltage Transient.

When the voltage across the diode becomes too high, the voltage is said to be over-driven, meaning it has exceeded the breakdown point or Zener Voltage. At this point the diode will break down and act as an electrical short, creating the current flow between either anode or cathode. This fuses the diode and limits the effects of the Voltage Transient, thus protecting the other components in the circuit.

When the voltage under-drives the diode, lower than its rated voltage, the diode will act as a rectifier and will remain open, allowing no current flow between either of its electrodes. This practically equates to an open circuit, implying there is no current flow. It can also be said that the Diode Clamps the voltage at the point of Zener breakdown.

Zener diodes are useful to provide protection against Voltage Transients, which are very common in power networks, digital circuits, and any circuits that may have sudden fluctuations in voltage. The same can be said for 1N4709 or DO35 diodes which can also be used for various electronic devices, such as computer equipment, sensors, and other electronic components in use today.

The 1N4709 diode is composed of a silicon semiconductor and features a maximum power dissipation of 500 milliwatts. It has a maximum clamped voltage of 9-Volts, a 5-Volt breakdown voltage rating, a 5.5-Volt operating current, and a maximum reverse-recovery time of 25ns.

In conclusion, the DO35 or 1N4709 diode is important for providing protection against Voltage Transients and other fluctuations in electric currents. This type of diode can be invaluable for protecting components within a circuit and is used in numerous applications today.

The specific data is subject to PDF, and the above content is for reference