1N4756CE3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N4756CE3/TR13 is a Zener diode, which is a special type of diode often ``shunted" with a resistor. It can be used in a variety of applications. For instance, Zener diodes can be used in the detection of overvoltages in power supplies and AC circuits. Furthermore, they can be used in logic devices, surge protection, and other applications that require a regulated voltages.

A Zener diode consists of two sections, an anode and a cathode, separated by a PN junction. When this junction is forward biased, the charge carriers travel across the junctures at a normal speed and recombine in the middle. When this junction is reverse biased, the recombination speed of charge carriers is increased, and their number decreases. This produces a voltage drop in the junction which is proportional to the amount of reverse bias voltage applied. Zener diodes are used for voltage regulation in circuits because of the wide working range of the junction.

The 1N4756CE3/TR13 part number for the Zener diode is composed of several components. The “1N” section indicates the package type of the diode, which is typically either a small glass encapsulated (1N) or a metal encapsulated (2N). The 4756 part is the device number, which corresponds to the voltage rating of the diode. The “CE3/TR13” section indicates the tolerance of the diode, which is usually 5%, 10%, or 15%.

In general, the 1N4756CE3/TR13 Zener diode is a widely used voltage regulator in commercial, industrial and consumer electronics. The diode utilizes a PN junction to reduce the voltage on the input power line and provide a regulated output. It can be used in various applications such as logic circuits, power supplies and voltage protection. In order to operate properly, the 1N4756CE3/TR13 zener diode should be connected in series with a resistor in order to limit the current through the device. This prevents the diode from becoming overloaded and damaged.

The working principle of 1N4756CE3/TR13 Zener diode is relatively simple. When a Zener diode is connected to a power supply or AC circuit with a voltage greater than the breakdown voltage of the device, the PN junction of the diode allows a reverse current to flow. This causes a potential difference to occur between the anode and cathode, creating a voltage divider in the circuit. This reduces the voltage on the input, producing a regulated output.

In conclusion, the 1N4756CE3/TR13 Zener diode is a special type of diode that is widely used in a variety of applications such as logic devices, surge protection and voltage regulation. The device utilizes a PN junction to reduce the voltage on the input power line and provide a regulated output. It is important to connect the diode in series with a resistor in order to limit the current through the device.

The specific data is subject to PDF, and the above content is for reference