Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

1N4749AHB0G(henceforth referred to as zener diode) are one of the most common types of diodes. These devices are used in both industrial and home applications as an electronic component. The zener diode is a low power diode that uses a reverse-biased p-n junction to produce a reversal of its properties, allowing it to operate in reverse-biased mode. The 1N4749AHB0G diode is the largest in its series and is the most commonly used.

When operating in forward-biased mode, the diode allows current to flow in the direction of the arrow. This type of current is known as forward current. The current then travels through the diode and can be used to power a variety of electronic components or used as a conductive bridge. In the reverse-biased mode, the 1N4749AHB0G creates a breakdown voltage known as the zener voltage. This voltage is proportional to the peak reverse-biased voltage of the diode, and serves as a protection or overload protection device. The zener voltage can be used to protect sensitive electronic components from electrical surges and to regulate the voltage being applied to the component.

The zener diode is a two-terminal device that consists of two junction diodes, one p-type and one n-type, in the same package. The p-type junction is connected to the anode of the diode, while the n-type junction is connected to the cathode. This results in a reverse-biased p-n junction, with the junction voltage being equal to the peak reverse-biased voltage of the diode. When current is introduced to the diode, the junction voltage becomes the zener voltage and the diode is said to be operating in reverse- biased mode. During the forward-biased mode, however, the zener voltage is not reached and the voltage across the diode decreases, resulting in a decrease in the forward current.

The 1N4749AHB0G zener diode has a wide range of applications, ranging from automotive power supplies and battery charging systems, to signal conditioning and voltage regulation. It is also a common component in ESD protection circuits and surge protection circuits. Zener diodes are commonly used as voltage regulators, as they allow the voltage applied to a component to be stabilized and maintain a lower steady-state voltage. They are also used with capacitors and resistors in a process known as rectification, allowing for the conversion of AC current to DC current.

In addition, 1N4749AHB0G zener diodes are also used as a noise suppressor. They act as a filter to reduce the noise in a signal caused by electromagnetic interference, allowing signals to be more reliably transmitted over long distances. The zener diode also acts as a protection device, as it can detect when the voltage being applied to an electronic component is too high. In this case, the zener diode shorts the excess current, protecting the electronic component from damage.

The 1N4749AHB0G zener diode is a versatile electronic component that has a wide range of applications. Its use as a voltage regulator and noise suppressor makes it an ideal component for electronic circuits, and it can be used in a variety of industrial and home applications. The device is relatively inexpensive, and its small size makes it an ideal component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference