1N4738ATA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4738ATA is a type of zener diode, which is a form of semiconductor device that provides a voltage that remains relatively constant over a wide range of currents. This type, in particular, is a single zener diode, meaning it consists of an only two terminals, an anode and a cathode. Zener diodes are commonly used in a variety of applications, ranging from voltage regulation in a power supply, to pulse shaping and signal coming in electronic circuits.

The 1N4738ATA is primarily used in applications such as overvoltage protection, voltage references, voltage clamping, and voltage limiting. They are ideal for protecting circuits from transient voltages and currents, or for providing a reference for the input and output of signals.

The working principle of the 1N4738ATA is similar to that of a typical diode, as it allows charge to flow in one direction but not the other. However, in the case of the zener diode, the diode is configured so that when the anode is more positive than the cathode, the diode starts to conduct current in the reverse direction. This results in a voltage drop across the diode which is relatively independent of the current passing through it. The amount of voltage that the zener diode will drop is referred to as its zener voltage, and is usually a fixed value that is set by the diode\'s manufacturer.

When the electric current passing through a zener diode causes the voltage drop to reach the zener voltage, then the zener diode will pass current in both directions. This allows the voltage to remain relatively stable regardless of the amount of current passing through it, allowing it to be used for the purposes mentioned above. In the specific case of the 1N4738ATA, the maximum forward voltage is 6.2 V, and the maximum steady Zener voltage is 34.5 + 50 mV.

In summary, the 1N4738ATA is a type of single Zener diode that is used in applications where a relatively constant voltage is needed; such as voltage regulation or protection from transient voltages and currents. The working principle of the device is that it passes current in one direction until the electric current causes the voltage drop across the diode to reach its zener voltage. Then it allows a relatively constant voltage to be maintained, regardless of the current passing through it. With a maximum forward voltage of 6.2V and a maximum steady Zener voltage of 34.5+50mV, the 1N4738ATA is a useful tool for many electronic applications.

The specific data is subject to PDF, and the above content is for reference