1N4751E3/TR13

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	30V
Tolerance:	±10%
Power - Max:	1W
Impedance (Max) (Zzt):	40 Ohms
Current - Reverse Leakage @ Vr:	5µA @ 22.8V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Base Part Number:	1N4751

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 1N4751E3/TR13 is a Zener diode, which has been designed to be used in a wide range of applications. It is a single component that is used to provide stability and insulation in circuit designs. This component is used to provide protection and regulation against electrical fluctuations, such as surges and spikes. It is also designed to be used in noise suppression applications. This article will discuss the application field and working principle of the 1N4751E3/TR13.

Application Field

The 1N4751E3/TR13 is primarily designed for use in regulating the voltage in circuits that are sensitive to fluctuations. It is mainly used to protect components from damage caused by overvoltage. This protection is achieved by allowing a small amount of current to pass through the diode and dissipate the excess voltage. The diode has a wide breakdown voltage range of 4-30V, so it can be used in various voltages.The 1N4751E3/TR13 is also used in noise suppression applications. The diode is used to reduce or eliminate high-frequency noise generated by components or circuits. The diode absorbs the noise energy, which then dissipates into the circuit. This reduces the amount of unwanted noise in the circuit.The diode is also used to protect digital circuits from electrostatic discharge (ESD). It acts as a protection layer against ESD by providing a high resistance when a voltage spike is applied to it. This prevents damaging components and ensures a reliable operation of the circuit.The 1N4751E3/TR13 can also be used as switches and logic gates. The diode works as a switch because it provides a low resistance when it is forward biased, and a high resistance when it is reverse biased. It can also be used as an OR logic gate to control the operation of a circuit, by providing the OR output when both inputs are raised at the same time.

Working Principle

The 1N4751E3/TR13 is a Zener diode, which means it is a diode which allows a current to flow in only one direction. When a voltage greater than the breakdown voltage is applied to the diode, it will start to conduct current. This is known as "breakdown" and is used to regulate the voltage in a circuit.When the diode is forward biased, electrons will flow from the N-type region to the P-type region. When a voltage greater than the breakdown voltage is applied, the movement of electrons will stop and a reverse current will start to flow. This reverse current is used to dissipate the excess voltage.In noise suppression applications, the diode works by absorbing the noise energy and converting it into a lower frequency signal. This reduces the amount of unwanted noise in the circuit.

Conclusion

The 1N4751E3/TR13 is a Zener diode that is used in a wide range of applications. It can be used to provide voltage regulation and protection against electrical fluctuations, and it is also used in noise suppression and ESD protection applications. The diode works by providing a low resistance when it is forward biased and a high resistance when it is reverse biased. This article discussed the application field and working principle of the 1N4751E3/TR13.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description