1N5275B BK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N5275B BK is a small signal Zener diode that is specifically designed to provide over-voltage protection, while also limiting the current through the device. It is made up of a glass passivated junction chip with an anode and cathode bonded wire, allowing it to be easily soldered onto circuit boards. This diode is also highly reliable as it has a wide operating temperature range and high power dissipation.

This zener diode falls into the category of single diodes due to its single junction structure. It has a low reverse current and can provide a high breakdown voltage with a standard E24 value. The 1N5275B BK is extremely versatile and can be used in various applications such as over voltage protection, voltage regulation, voltage clamping, and surge suppression. It is qualified for use in automotive grade systems and radiation-hardened and harsh environment applications, making it an ideal choice for a variety of industries.

The primary function of the 1N5275B BK is to provide a reference voltage that is lower than the maximum accepted voltage supply. The device then acts as a short circuit to any voltage surge above this level. It is most commonly used in simple voltage clamps, like those found in modems, where the voltage remains within a certain range regardless of the input voltage level. It can also be used in combination with other diodes to provide over-voltage protection and current limiting.

The working principle of the 1N5275B BK is as follows: when a transient or continuous overvoltage is measured, the zener diode is configured to maintain a reference voltage at a specified value lower than the supplied voltage. This is accomplished by using a voltage divider composed of a low value resistor and a series of zener diodes, each with their own breakdown voltage. When the voltage applied to the diode exceeds its breakdown value, it then behaves like a low impedance, allowing current to flow from the application source to the protected load.

In the case of overvoltage protection, the 1N5275B BK can be used to provide a protective clamping mechanism which limits the peak voltage delivered to the load. This is achieved by reconfiguring the device to act as a voltage limiter, meaning that when an input voltage exceeds the pre-defined limit, the diode will start to conduct and in turn lower the output voltage to the desired level. In addition to protection, the device can also be used as a voltage regulator to maintain a steady voltage level.

Finally, another application in which the 1N5275B BK can be used is in surge suppression. In this case, the device is connected in parallel with the protected load, even though the situation is considered to be reverse operating mode. When a high-temperature or -voltage surge is detected, the diode will start to conduct, resulting in a decrease of the input voltage and thus providing surge protection for the related load.

The 1N5275B BK is a small but extremely effective diode, widely used in many applications requiring efficient overvoltage protection and current limiting. Combining its low cost, wide operating temperature range and reliability, it is easy to see why it is such a popular choice in the market. In addition, its ease of integration and versatile applications make it the perfect solution for any circuit requiring protection from voltage or current surges.

The specific data is subject to PDF, and the above content is for reference