1N5342E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N5342E3/TR13 is a 3.3V 500mW Zener diode that has a wide range of practical applications. It is a voltage regulating diode, meaning it regulates or maintains the voltage across its terminals around a certain value. This makes it perfect for uses such as controlling the voltages in other circuits, or protecting components from overvoltage.

The main purpose of this diode is to provide stable, accurate and cost-effective voltage regulation. It is capable of providing levels of stability down to ± 0.5V, and is extremely resistant to environmental stress. The diode is also very efficient, with a low voltage drop and extremely low power dissipation.

The 1N5342E3/TR13 has a variety of applications in consumer electronics. It is used in power supplies and voltage regulators, radio equipment, automotive electronics, computers, and in audio equipment. In each of these applications, the diode provides a stable and consistent voltage output, and is used to ensure voltage accuracy and reliability of the overall system.

The 1N5342E3/TR13 is a single diode, meaning it consists of only one diode. It operates by passing current through its cathode, or negative terminal, and blocking the current from passing through the anode, or positive terminal. This diode does not generate any voltage, and therefore requires a forward voltage to be supplied from an external source.

When a forward voltage is applied across the anode and cathode of the 1N5342E3/TR13, a small amount of current will start to flow. This current passing through the diode will create an electric field, which is essentially a voltage difference between the anode and cathode. This voltage difference will cause current to be diverted to the cathode, where it will be regulated.

The voltage regulation of the 1N5342E3/TR13 is determined by two factors: the zener voltage and the zener current. The zener voltage is the voltage at which the diode begins to break down, allowing current to pass rapidly. The zener current is the current held in the diode once the breakdown occurs.

The 1N5342E3/TR13 is designed to operate in forward bias and reverse bias configurations. In forward bias, the diode behaves like an ordinary diode and the anode will remain at a higher voltage than the cathode. This is used for applications such as voltage regulation, where the diode is used to maintain a consistent voltage output.

In reverse bias, the anode is at a lower voltage than the cathode. This creates a large electric field between the two terminals, and when the voltage reaches the zener voltage of the diode, a breakdown occurs and current begins to flow through the diode. This configuration is used in applications such as overvoltage protection, where the diode is used to prevent damage from being done to other components by high voltages.

In conclusion, the 1N5342E3/TR13 is a 3.3V 500mW Zener diode with a wide range of applications. It is well suited for uses such as voltage or current regulation, overvoltage protection, and radio and audio equipment. The diode can be operated in either forward or reverse bias configurations and is capable of providing stable and accurate voltage regulation.

The specific data is subject to PDF, and the above content is for reference