1N5380BRLG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor components that enable the flow of current in one direction, from the anode to the cathode. They are used for many different applications, including rectifying alternating current, providing surge protection for circuits, and providing a level of voltage regulation for high frequency and high voltage circuits. Zener diodes are one type of diode that allow current to flow in a reverse direction, from the cathode to the anode, when the voltage exceeds a specified value. The 1N5380BRLG is a single Zener diode, packaged in a plastic case, and rated for use in a variety of applications.

The 1N5380BRLG Zener diode has a variety of applications, but its primary use is as a voltage regulator in high frequency and high voltage circuits. For example, it can be used as an overvoltage protection device in order to maintain the stability of a circuit, which is particularly helpful in higher voltage applications. This diode can also be used to provide positive temperature coefficient (PTC) protection in order to limit current in the event of an overcurrent situation. Furthermore, in telecommunications systems and other applications, this diode can be used to condition and enhance signals.

The 1N5380BRLG diode has a silicon-controlled reverse recovery rating of 2.8 volts, and it is capable of handling peak inverse voltage of 75 volts at ambient temperature. It can handle a power dissipation of 0.5 watts, and it has a maximum operating temperature of 150 degrees Celsius. This diode is designed to have an operating current of 5mA, with a maximum dynamic impedance of 5 ohms. It has a maximum reverse surge current of 1A, and a forward voltage drop of one volt.

The 1N5380BRLG diode works by regulating the voltage present in a circuit. When the voltage in the circuit exceeds a certain limit, the diode allows current to flow in a reverse direction from the cathode to the anode, which reduces the voltage back to the predetermined level. This is done by a series of electrical events, including the release of the stored energy from the junction depletion layer, and the concurrent expansion of the depletion layer until the applied voltage is reached again. The release of the stored energy comes in the form of a reverse current, which reduces the amount of excess voltage in the circuit.

In conclusion, the 1N5380BRLG Zener diode can be used for a variety of applications, such as as an overvoltage protection device, a PTC protection device, and as a signal conditioning and enhancing device. This diode is made of a silicon-controlled rectifier, and it is designed to regulate the voltage present in a circuit by allowing current to flow in a reverse direction when the voltage exceeds a certain limit. It has a reverse surge current of 1A and a maximum forward voltage drop of 1 volt, and it can handle a power dissipation of 0.5 watts. This diode is designed to have an operating current of 5mA, with a maximum dynamic impedance of 5 ohms.

The specific data is subject to PDF, and the above content is for reference