1N5395GPHE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N5395GPHE3/54 diode is a single rectifier diode which has many practical applications. In electronics, a diode is a two-terminal electrical device that has a negative resistance junction between its two terminals, allowing electrical current to flow in one direction with minimal resistance, while blocking current from flowing in the opposite direction. A rectifier diode is a semiconductor device which has a single element and primarily functions in either the forward or reverse conduction mode. Specifically, the 1N5395GPHE3/54 diode is designed for general use applications, such as reverse-voltage protection and diode-bridge rectification.

The working principle of a 1N5395GPHE3/54 diode is based on the P-N junction rectification. A basic P-N junction device is formed when two materials that have different electrical properties are merged together. In the P-N junction, this caused the formation of a depletion layer. The strength of the depletion layer can be increased by applying a larger reverse bias voltage which increases the electric field of the junction. When this reverse bias is strong enough, it blocks any current from flowing, except for a small leakage current. When forward bias is applied (i.e. a positive voltage is applied to the anode and a negative voltage to the cathode), it weakens the depletion layer, allowing current to flow in the forward direction and being blocked in the reverse direction. This makes P-N junctions an ideal way to control current flow in a circuit, as they are able to block current in one direction and conduct current in the other direction.

Apart from preventing current flow in one direction, the 1N5395GPHE3/54 diode is usually employed in reverse-voltage protection circuits, which are designed to protect delicate electronic components from overvoltage transients. Overvoltage transients are caused by momentary spikes in the voltage which occur due to sudden changes in the load or environmental conditions, such as lightning. In order to protect the circuit from such transients, the 1N5395GPHE3/54 diode is connected in reverse bias to the power supply, across the load. When the influx of the transient voltage reaches the diode, it causes an increase in the voltage across the diode. As the reverse bias voltage has already been applied to the diode, the increased voltage which results from the transient is blocked from passing to the rest of the circuit, while still allowing a small current to be conducted through the diode.

Another practical application of the 1N5395GPHE3/54 diode is in a diode-bridge rectification circuit. This circuit commonly consists of four diodes connected in a bridge configuration. The purpose of the circuit is to convert AC voltage to DC voltage. This is done by rectifying the AC voltage (which constantly changes direction) to DC (which only flows in one direction). When an AC voltage is applied across the bridge, the the diodes will only allow the half of the sinusoidal waveform which exceeds 0 volts to be rectified and “passed-on” to the load. Due to its general-purpose design, the 1N5395GPHE3/54 diode is very suitable for use in diode-bridge rectification circuits.

In conclusion, the 1N5395GPHE3/54 diode is a single rectifier diode which is designed for general use applications. It has the ability to control current flow in one direction, while blocking current from flowing in the opposite direction. This makes it suitable to a number of practical applications, such as reverse-voltage protection and diode-bridge rectification.

The specific data is subject to PDF, and the above content is for reference