1N6277AHE3_A/C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) diodes are designed to externally protect sensitive electronic equipment from overvoltage transients caused by lightning or electrical switching, such as inductive load surge and Electrostatic Discharge (ESD). The 1N6277AHE3_A/C is a unidirectional TVS diode that is designed to protect sensitive circuits from long duration ESD damage. It can be configured in an ESD protection circuit to protect a single line or as a series circuit to protect several lines.

1N6277AHE3_A/C diodes have an operating voltage of 400V and a clamping voltage of 700V. This diode is designed to provide protection from transient voltage for a wide range of electronic components. 1N6277AHE3_A/C diodes have a fast response time to transients, typically less than 5 nanoseconds, and a low leakage current. They have a low capacitance and are suitable for data and ls cabling protection, such as USB and DVI. 1N6277AHE3_A/C is suitable for a wide range of applications, including computers, consumer electronics, telecommunications, and automotive.

The working principle of the 1N6277AHE3_A/C diode is to clamp the voltage that appears across a transient voltage protection circuit. When a positive transient voltage appears across the circuit, the diode will conduct current and start to clamp the voltage to its breakdown voltage. The diode will also conduct current in the reverse direction, providing protection against negative transients. The diode will clamp the voltage and dissipate the transient energy as heat, protecting the device from damage. The diode will also self-reset when the transient has disappeared.

The 1N6277AHE3_A/C is designed for applications that require IEC 61000-4-2 ESD tested levels, IEC 61000-4-4 Lighting Induced Transient Pulse, and IEC 61000 4-5 Fast Transient Burst for high levels of protection. The 1N6277AHE3_A/C is compatible with High Density Interconnects and can be surface mounted using standard techniques. The diode offers up to 400V of protection, allowing designers to use it in a wide range of applications where high levels of protection are required.

The 1N6277AHE3_A/C is a robust and reliable diode designed to protect electronic components and systems from voltage overshoots caused by ESD, lightning, and other transients. The diode can be used in any application requiring up to 400V of transient voltage protection. It is suitable for use in computers, consumer electronics, telecommunications, and automotive applications.

The specific data is subject to PDF, and the above content is for reference