1SMA4743TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1SMA4743TR is a diode-type device that is classified under the single Zener category. It is used in a wide variety of applications, such as voltage regulation, voltage stabilizing, overvoltage protection, and as a clipper or clamp device for suppressing surges.

The single Zener category refers to breakdown diodes that are designed to withstand a reverse voltage of up to a specific voltage value. This amount of voltage is referred to as the Zener voltage, and when the device is subject to a voltage higher than the Zener voltage, the current will break through the diode boundary, producing a reverse voltage that is equal to the Zener voltage. This design helps to regulate the amount of excess current and protect the device from dangerous voltage and current levels.

The 1SMA4743TR is a small signal Zener diode and is mostly used in devices such as audio amplifiers, switching power supplies, vector-controlled drives and deflection control circuits. It is also used in logic output protection circuits and protection circuits for low power circuits and telecommunication equipment. The device’s small size allows it to be used in high-density circuits, and its large power dissipation helps it to stay cool and protect sensitive circuits from overheating.

The 1SMA4743TR is based on PN junction technology and consists of a semiconductor material such as silicon, gallium arsenide, or germanium. It is rated for a maximum current of 500 mA and a maximum voltage of 30 V. The device is typically operated at a temperature range of -65°C to 150°C, with a maximum power dissipation of 1 W. The device’s power rating helps to protect circuits from overloads and avoid unnecessary failures.

In terms of the working principle, the 1SMA4743TR is designed with an active area on the cathode side of the junction. The PN junction is reverse biased when the junction is at a zero bias or when no external voltage is applied. The junction does not conduct in this condition and acts as an insulator. When a reverse voltage is applied to the junction, the electric field increases and starts to break down the layers of the junction. This causes the electric charge carriers to move through the junction in the opposite direction, allowing current to flow. This flow of current is controlled by the Zener voltage, which acts as a threshold. The 1SMA4743TR can be used in circuits to regulate currents at specific voltages while preventing currents from exceeding the Zener voltage.

To conclude, the 1SMA4743TR is a single Zener diode and is mainly used in voltage regulation, voltage stabilizing, overvoltage protection, and in clipper or clamp applications. It has a small size and is suitable for high-density circuits and offers a high power dissipation. Its working principle is based on the PN junction technology and relies on a reverse bias to produce a current flow that is controlled by the Zener voltage.

The specific data is subject to PDF, and the above content is for reference