
Allicdata Part #: | 1T3GA0G-ND |
Manufacturer Part#: |
1T3G A0G |
Price: | $ 0.02 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Taiwan Semiconductor Corporation |
Short Description: | DIODE GEN PURP 200V 1A TS-1 |
More Detail: | Diode Standard 200V 1A Through Hole TS-1 |
DataSheet: | ![]() |
Quantity: | 1000 |
21000 +: | $ 0.01721 |
Series: | -- |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 200V |
Current - Average Rectified (Io): | 1A |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 1A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Current - Reverse Leakage @ Vr: | 5µA @ 200V |
Capacitance @ Vr, F: | 10pF @ 4V, 1MHz |
Mounting Type: | Through Hole |
Package / Case: | T-18, Axial |
Supplier Device Package: | TS-1 |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
1T3G A0G is a rectifier, it is also called a rectifier bridge, a bridge rectifier or a Graetz bridge. A rectifier is an electrical device that is used to convert alternating current (AC) to direct current (DC). It consists of four diodes arranged in the form of a bridge. Rectification of AC power is done by a rectifier bridge and is widely used in many applications such as small power supplies, electromagnetic braking and power factor correction.
Working Principle of Rectifier Bridge
The rectifier bridge consists of four diodes arranged in the shape of a bridge or a cross. The two middle components of the rectifier bridge are the two AC inputs and two outer components are the DC output ports. The two AC inputs of the bridge rectifier are connected to an AC source and the two DC outputs are connected to the load.
When the AC source is applied to the bridge rectifier, current starts to flow through the diodes. Depending on the orientation of the diodes, current will flow in one direction, i.e. diode forward biased and then the diode reverse biased will act as an open circuit, stopping the current from flowing in the opposite direction. This process is called rectification, which results in unidirectional current flow.
The bridge rectifier has five operation states which are noted in the figure below.

Application Field
Rectifier bridges are widely used in many applications such as power supplies, DC motors and generators, power factor correction, power quality improvement, radio-frequency equipment, etc. They are also used in applications such as switched-mode power supplies, electro-mechanical braking, DC-DC converters, and AC-DC converters. Bridge rectifier can be used to provide DC power from frequency-varying AC power sources, such as home appliances and electric vehicles.
The bridge rectifier is also used in AC-DC power conversion. It is used in many power electronics applications and circuit designs such as UPS, battery chargers, and variable-frequency drives. It is used for rectification of single-phase or three-phase AC power for power-supply purposes. The input current wave shaped can be changed by changing the direction and number of diode in the circuit.
Conclusion
In conclusion, 1T3G A0G is a rectifier bridge, it is a device used to convert alternating current (AC) to direct current (DC). The two AC inputs of the bridge rectifier are connected to an AC source and the two DC outputs are connected to the load. Rectifier bridges are widely used in many applications such as power supplies, DC motors and generators, power factor correction, power quality improvement, radio-frequency equipment, etc. The bridge rectifier is also used in AC-DC power conversion.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...

DIODE SCHOTTKY 40V 500MA SC76Diode Schot...

DIODE GEN PURPOSE DO-204ALDiode

DIODE GEN PURP 400V 1A DO41Diode Standar...

DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...

DIODE GEN PURP 400V 500MA D5ADiode Stand...
