2035-30-SM-RPLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are a type of surge protector device designed to protect electrical and electronic components from voltage overloads. GDTs are typically constructed from two concentric tubes filled with a noble gas and an inner conductor. A high-voltage potential applied to the outer tube causes a breakdown of the gas molecules, allowing current to flow inside the conduit between the inner and outer tubes. This current then passes quickly through a breakdown resistor, allowing it to be diverted to the desired load. In most applications, the current is discharged into a capacitor, which then stores the energy and prevents any further discharge.

The 2035-30-SM-RPLF is an advanced surge protection device from Murata Electronics designed for use in high-voltage direct current (HVDC) systems. It is engineered to handle up to 35kV of surge voltage and 30kA peak current. It is suitable for applications that require a high degree of protection against extreme levels of surge currents and voltages such as power supplies, power substations, and data center infrastructure.

The 2035-30-SM-RPLF surge arrester consists of two ceramic tubes filled with a noble gas, such as nitrogen or argon, and a conductive metal coating. When the voltage potential rises above a certain level, the gas molecules break down and arc across the inner and outer tubes, allowing some light to be emitted. This arc then passes through the inner conductor and is monitored and diverted by the arrester to the desired load or capacitor.

The 2035-30-SM-RPLF surge arrester is designed to minimize energy losses during operation. Its ceramic insulating coating is designed to reduce electric field strength, resulting in improved breakdown performance and a higher voltage rating than traditional surge arresters. The coating also helps to dissipate heat during arcing, allowing the arrester to cool quickly and avoid thermal runaway.

The 2035-30-SM-RPLF is designed with a high level of surge protection while maintaining cost and size to a minimum. Its small form factor allows for easy installation in existing designs and its flexible design enables it to be used with a range of switchgear and busbar combinations. This surge arrester is suitable for use in a wide range of applications including power supplies, data center systems, industrial installations, and high voltage DC power systems.

In summary, the 2035-30-SM-RPLF is part of Murata Electronics\' Gas Discharge Tube Arresters product line. It is designed to handle voltage overloads of up to 35kV, is suitable for use in a wide range of applications, and its advanced design minimizes energy losses while maximizing surge protection. Its small form factor makes it suitable for use with existing designs, and its flexibility makes it a viable option for a variety of switchgear and busbar combinations.

The specific data is subject to PDF, and the above content is for reference