| Allicdata Part #: | 20J180E-ND |
| Manufacturer Part#: |
20J180E |
| Price: | $ 1.19 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 180 OHM 10W 5% AXIAL |
| More Detail: | 180 Ohms ±5% 10W Through Hole Resistor Axial Flame... |
| DataSheet: |  20J180E Datasheet/PDF |
| Quantity: | 51 |
| 1 +: | $ 1.07550 |
| 10 +: | $ 0.95310 |
| 25 +: | $ 0.88362 |
| 50 +: | $ 0.83160 |
| 100 +: | $ 0.72765 |
| 250 +: | $ 0.62370 |
| 500 +: | $ 0.51975 |
| 1000 +: | $ 0.45045 |
| 5000 +: | $ 0.43659 |
Specifications
| Series: | 20 |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 180 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 10W |
| Composition: | Wirewound |
| Features: | Flame Retardant Coating, Safety |
| Temperature Coefficient: | ±30ppm/°C |
| Operating Temperature: | -- |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.394" Dia x 1.858" L (10.00mm x 47.20mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors A through hole resistor is an electrical component that helps regulate electrical currents and change their direction of flow. In the most basic form, these resistors consist of a metal or carbon core, covered with layers of conductive material, and typically measure between 1/1000 and 1/4 the size of a standard resistor. The core is then insulated by a heat-resistant ceramic coating to protect it from melting in extreme conditions. Through hole resistors have a wide range of applications, including in low signal applications, audio/video signal applications, power conditioning applications, and general industrial applications. They are used to regulate the voltage, current, and impedance of circuits, as well as providing protection against short circuits and overvoltage conditions. By controlling the flow of electrical current through the device, through hole resistors are also used to ensure that the equipment protected by them is able to function properly. For the most part, all through hole resistors work on the same basic principle of conversion. The resistor converts electrical energy into heat energy and then dissipates it. The resistor is made with specific material that is a conductor of electricity. This material is arranged in an organized way and, when electricity is passed through it, heat is generated. This heat is then released into the air and dissipated. As the electricity is passed through the resistor, it loses energy and its voltage is reduced. There are different types of through hole resistor, such as those that use single-layer or multi-layer ceramic, as well as those that use tantalum, inductors, and plastic-coated cored resistors. Depending on the application, one type of resistor may be better suited than another. The type of resistor used also depends on the environment in which it will be used, such as a humid or wet environment. The size and power of the through-hole resistor will vary depending on the purpose for which it is used. High-power resistors tend to be larger and more expensive than low-powered ones, while low-power resistors are usually smaller and less expensive. The temperature at which the resistor is expected to operate is also an important factor when selecting a through-hole resistor. In terms of design, through hole resistors are usually designed in a number of ways. Some resistors are designed as single-layer, while others are designed as multi-layer. Other resistors are designed as single- or multi-layer wire-wound, and some feature a hybrid construction. When it comes to installation, through-hole resistors require more care than other types. Depending on the size and power of the resistor, the hole must be drilled with either a high-speed rotary tool or a drill press. Heat-resistant gloves must be used during the installation, and the resistance needs to be measured to ensure that the right size and number of holes have been drilled. If the hole is too small, it may cause too much resistance; too large, too little resistance. For any application, the most important factor is to ensure that the through-hole resistor is properly and safely installed. The design and installation of through hole resistors is the only way to ensure an optimum performance from these electrical components.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "20J1" Included word is 40
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| 20J1R0E | Ohmite | 1.38 $ | 202 | RES 1 OHM 10W 5% AXIAL1 O... |
| 20J1R5 | Ohmite | 0.88 $ | 1000 | RES 1.5 OHM 10W 5% AXIAL1... |
| 20J15RE | Ohmite | 1.31 $ | 290 | RES 15 OHM 10W 5% AXIAL15... |
| 20J18RE | Ohmite | 1.31 $ | 92 | RES 18 OHM 10W 5% AXIAL18... |
| 20J1K2 | Ohmite | 0.79 $ | 1000 | RES 1.2K OHM 10W 5% AXIAL... |
| 20J1K1E | Ohmite | 0.83 $ | 1000 | RES 1.1K OHM 10W 5% AXIAL... |
| 20J16K | Ohmite | 1.12 $ | 1000 | RES 16K OHM 10W 5% AXIAL1... |
| 20J1K5 | Ohmite | 0.79 $ | 1000 | RES 1.5K OHM 10W 5% AXIAL... |
| 20J125E | Ohmite | 1.19 $ | 275 | RES 125 OHM 10W 5% AXIAL1... |
| 20J120E | Ohmite | 0.69 $ | 1000 | RES 120 OHM 10W 5% AXIAL1... |
| 20J11KE | Ohmite | 1.09 $ | 1000 | RES 11K OHM 10W 5% AXIAL1... |
| 20J10RE | Ohmite | 1.31 $ | 1646 | RES 10 OHM 10W 5% AXIAL10... |
| 20J18R | Ohmite | 0.83 $ | 1000 | RES 18 OHM 10W 5% AXIAL18... |
| 20J1K75E | Ohmite | 0.83 $ | 1000 | RES 1.75K OHM 10W 5% AXIA... |
| 20J1K0E | Ohmite | 1.42 $ | 259 | RES 1K OHM 10W 5% AXIAL1 ... |
| 20J12K | Ohmite | 1.12 $ | 1000 | RES 12K OHM 10W 5% AXIAL1... |
| 20J1K2E | Ohmite | 1.42 $ | 1191 | RES 1.2K OHM 10W 5% AXIAL... |
| 20J125 | Ohmite | 0.75 $ | 1000 | RES 125 OHM 10W 5% AXIAL1... |
| 20J100E | Ohmite | 1.19 $ | 305 | RES 100 OHM 10W 5% AXIAL1... |
| 20J16KE | Ohmite | 1.09 $ | 1000 | RES 16K OHM 10W 5% AXIAL1... |
| 20J180E | Ohmite | 1.19 $ | 51 | RES 180 OHM 10W 5% AXIAL1... |
| 20J1K8E | Ohmite | 0.83 $ | 1000 | RES 1.8K OHM 10W 5% AXIAL... |
| 20J13K5E | Ohmite | 1.09 $ | 1000 | RES 13.5K OHM 10W 5% AXIA... |
| 20J10R | Ohmite | 0.83 $ | 1000 | RES 10 OHM 10W 5% AXIAL10... |
| 20J1K0 | Ohmite | 0.79 $ | 1000 | RES 1K OHM 10W 5% AXIAL1 ... |
| 20J100 | Ohmite | 0.75 $ | 1000 | RES 100 OHM 10W 5% AXIAL1... |
| 20J1K5E | Ohmite | 1.42 $ | 339 | RES 1.5K OHM 10W 5% AXIAL... |
| 20J12RE | Ohmite | 0.76 $ | 1000 | RES 12 OHM 10W 5% AXIAL12... |
| 20J120 | Ohmite | 0.75 $ | 1000 | RES 120 OHM 10W 5% AXIAL1... |
| 20J18KE | Ohmite | 1.09 $ | 1000 | RES 18K OHM 10W 5% AXIAL1... |
| 20J17K5E | Ohmite | 1.09 $ | 1000 | RES 17.5K OHM 10W 5% AXIA... |
| 20J1R5E | Ohmite | 0.8 $ | 1000 | RES 1.5 OHM 10W 5% AXIAL1... |
| 20J150E | Ohmite | 1.19 $ | 554 | RES 150 OHM 10W 5% AXIAL1... |
| 20J12KE | Ohmite | 1.09 $ | 1000 | RES 12K OHM 10W 5% AXIAL1... |
| 20J10KE | Ohmite | 1.9 $ | 361 | RES 10K OHM 10W 5% AXIAL1... |
| 20J12K5E | Ohmite | 1.09 $ | 1000 | RES 12.5K OHM 10W 5% AXIA... |
| 20J11K | Ohmite | 1.12 $ | 1000 | RES 11K OHM 10W 5% AXIAL1... |
| 20J150 | Ohmite | 0.75 $ | 1000 | RES 150 OHM 10W 5% AXIAL1... |
| 20J15KE | Ohmite | 1.9 $ | 571 | RES 15K OHM 10W 5% AXIAL1... |
| 20J1K25E | Ohmite | 0.83 $ | 1000 | RES 1.25K OHM 10W 5% AXIA... |
Latest Products
SQM700JB-68K
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
SQM700JB-1R3
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RNC60J24R9FSB14
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RWR89S2R80DRS70
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RNC60J7503FSB14
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RWR81S3400FSB12
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...