20J1K2

Series:	20
Packaging:	Bulk
Part Status:	Active
Resistance:	1.2 kOhms
Tolerance:	±5%
Power (Watts):	10W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.394" Dia x 1.858" L (10.00mm x 47.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors
Through hole resistors are electrical components that are used to limit the flow of electric current, correct signal levels, and to divide voltages. They have two or more terminals where one of the terminals is used to establish a certain resistance to the flow of current. The actual resistance value is marked on the resistor. These resistors are usually composed of ceramic, metal film, or carbon film. In this article, we will be discussing the application fields and working principles of 20J1K2 through hole resistors.Applications of 20J1K2 Through Hole Resistors
20J1K2 through hole resistors are widely used in a variety of applications. They are commonly used in high-power applications such as amplifiers, power supplies, and charging controllers. They are also used in electronic circuits for voltage regulation, current regulation, and impedance matching. Due to their low thermal coefficient, these resistors can be used for thermal management in consumer electronics and power supplies. They are also used in radio frequency circuits such as RF amplifiers, receivers, and transmitters.Working Principle of 20J1K2 Through Hole Resistors
The working principle of 20J1K2 through hole resistor is based on the fact that they resist the flow of electric current. In a resistor, a material is used whose resistance value is determined by its material properties. When electric current passes through the resistor, the voltage across it will be lower than the voltage applied due to the material resistance. Thus, the current through the resistor is limited and reduced.The resistance value of 20J1K2 through hole resistor is determined by the temperature, number of turns, size, and material used. When the temperature changes, the resistance value can also change. This is because the resistance of the material used to manufacture the resistors will also vary with temperature. Similarly, as the number of turns in the resistor increases, its resistance value will also increase.Conclusion
In conclusion, 20J1K2 through hole resistors are used in a variety of applications to regulate current, voltage, and impedance. They can also be used for thermal management in consumer electronics and power supplies. The working principle of these resistors is based on the fact that they resist the flow of electric current and the resistance value is determined by the temperature, number of turns, size, and material used.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description