2321606

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

232160-6 cable assemblies are an integral part of any automated control system and are a key component in the ability to operate an industrial machine. This type of cable assembly is composed of four coils wound around a core wire. It is designed to transmit control signals from a controller to the various components of a machine. The cable assembly must be designed properly to ensure reliable and accurate operation of the equipment it controls.

The four coils, each composed of many strands of fine wire wound together, are designed to create a resistive force within the core wire. As the core wire is pulled or pushed by a control signal, this causes a corresponding force to be created between the coils of the cable assembly. This force is then transmitted along the wire so that the desired machine operations can be carried out. This type of control signal is commonly referred to as a pulse width modulated (PWM) signal.

The 232160-6 cable assemblies come in a variety of sizes and can be used to accommodate different machine requirements. They are typically available in sizes ranging from 800 to 2200mm in length. The coil design also varies depending on the application. For example, for a machine that has long hard-to-reach places, a long cable assembly may be required. A short cable may be better suited for smaller applications.

The cable assembly includes two sets of contacts: one for connecting the primary and secondary windings, and the other for connecting the power supply. These contacts are connected to the wire and provide a connection point between the two sections of the cable assembly. The contacts may be either crimped or soldered into place.

In addition to providing a means of controlling machines, 232160-6 cable assemblies are also used for powering certain devices. By connecting one side of the wire to the power supply, and the other side to the device, the device can be powered. This application is particularly useful in cases where the device is located in an area that is difficult to access or where it is not possible to use conventional wiring.

The working principle of 232160-6 cable assemblies is relatively simple. As an incoming control signal is applied to the cable, the four coils create a resistive force within the core wire. This resistive force causes the cable to move in response to the signal, which is then transmitted along the wire. The resistive force can also be adjusted by adjusting the tension of the cable to achieve the desired level of control.

232160-6 cable assemblies are available in a variety of formats and can be used in a range of different applications. Because of their flexibility, they are ideal for controlling machines, powering devices, and connecting components. As such, this type of cable assembly is an important part of any industrial automation system.

The specific data is subject to PDF, and the above content is for reference