241NQ040-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 241NQ040-1 is a silicon controlled rectifier device and is typically used to switch a large current. This device has been designed for specialized uses in applications such as power supplies, motor control, and lighting systems.

A typical SCR consists of three layers: an anode and a cathode terminal, and a gate. The gate consists of a number of semiconductor layers, which act as a switch, triggering the circuit and either allowing current or not allowing it. The SCR is essentially a two-terminal solid-state switch.

When the switch is turned on, the current flows through the SCR, allowing it to become conductive. This is done by altering the voltage and current applied to the gate terminal. The electrical properties of the SCR cause the switch to remain on until the voltage and current are reversed, allowing the current to flow in the opposite direction, turning the switch off.

The 241NQ040-1 is designed to operate within a maximum voltage of 600 V, with a maximum current of 1.25 A. It also has a variety of built-in safety features, such as an over-temperature protection that limits the temperature at which the switch can operate, and a short circuit protection which limits the current it can draw. The device is also protected against shunt and anode current.

The 241NQ040-1 also features a low forward voltage drop and low on-state voltage. This allows it to operate efficiently, without consuming a large amount of power. Additionally, the device is designed to withstand high peak surges, making it suitable for use in applications that require protection against power surges.

The 241NQ040-1 is commonly used in applications such as motor control, lighting systems, and power supplies. It is generally used to switch large currents from around 600 V and up to 1.25 A. This device is also suitable for use in power factor correction and power conversion applications.

In conclusion, the 241NQ040-1 is a silicon controlled rectifier which is designed for specialized uses. It is commonly used in applications such as motor control, lighting systems, and power supplies. It can operate at up to 600 V and up to 1.25 A, with a variety of built in safety features.

The specific data is subject to PDF, and the above content is for reference