24LC024T-E/MNY

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24LC024T-E/MNY is a member of the 24LC family of Serial EEPROM or Electrically Erasable Programmable Read-Only Memory devices. As an EEPROM, the 24LC024T-E/MNY can store up to 24K bytes of data which can be read and written to over a two-wire interface. The device also offers an industry standard I2C serial interface making it easy to integrate into existing applications. It offers page write functionality which allows up to 32 bytes of data to be written to the device in a single access cycle and word address pointer functionality that simplifies the reading of specific data locations in the device\'s memory array.

The 24LC024T-E/MNY is suitable for use in many consumer electronic products, industrial and automotive applications, such as audio and video systems, consumer electronics, industrial process control, automotive and medical instrumentation. This device is often used when it is important to store data that needs to remain in a non-volatile form for a long period of time and can easily be updated without being removed from the system.

The 24LC024T-E/MNY provides all the control and logic necessary to interface directly to a microcontroller or any other microprocessor/microcomputer interface. The device is typically controlled by a controller microprocessor and all data transfers are performed in serial format. The 24LC024T-E/MNY contains a decoder, an address counter, a write protection circuit, a write instruction latch, a page write buffer, address, data and write control logic.

Initially the 24LC024-E/MNY must be set up to determine what address it will respond to, this is achieved by setting the pins A2, A1 and A0. The device can be addressed up to 8 times and the slave address being determined by the logic combination of these three bits of address. To read or write data to the Serial EEPROM the master device will send a slave address followed by either a \'read\' or \'write\' bit. If the read bit is a \'1\' the data will be read from the device, otherwise it is a \'write\' and data will be written to the device in the following data byte.

The 24LC024T-E/MNY device is 8-pin device and needs to be connected to a power supply consisting of a VCC and GND connection. The SDA and SCL pins need to be connected to two open drain/open collector pins of a microcontroller or other microcomputer interface. It is also recommended to have a pull up resistor between the pin and VCC to provide a reference voltage.

The 24LC024T-E/MNY offers 4K pages of 32 bytes of data storage. The page size is 32 bytes, with a maximum writing cycle time of 5ms and an access time of 5ms. The device has a maximum write cycle endurance of 1,000,000 cycles. The device also offers a built-in 16-bit cyclic redundancy check (CRC) for data integrity checking. This protection allows for cross correlated data to ensure that it is up to date and not corrupted.

In summary, the 24LC024T-E/MNY is a reliable and versatile way of providing non volatile memory storage in industrial and automotive applications. It offers a simple 2 wire interface and reliable data storage making it easy to integrate into existing systems. It provides low power consumption and a long life cycle making it suitable for extended use. It also offers the data integrity of a 16-bit CRC to ensure that data is constantly up to date and maintained.

The specific data is subject to PDF, and the above content is for reference