24LC025T/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24LC025T/ST memory, which belongs to the category of serial electrically erasable programmable read-only memory (EEPROM) devices, is an efficient and reliable way of storing important or sensitive data. The Serial Peripheral Interface (SPI) protocol developed by Motorola is used with the 24LC025T/ST in order to facilitate consistent and reliable communication with the memory device. In this article, the application field and working principles of the 24LC025T/ST memory device is explored.

Applications of the 24LC025T/ST

The 24LC025T/ST memory device is used in a variety of applications in many different industries. because of its low power consumption and its efficient data storage capabilities. It can be used in the automotive industry, to save important settings and to store parameters that need to be controlled by the on-board computer. Also, as the 24LC025T/ST has a low voltage operation of 2.7~5.5V and minimal power consumption of 320 µA, it can also be used in power sensitive devices such as solar powered LEDs in remote sensors, wireless devices and the Internet of Things (IoT). It is also used in medical devices such as heart rate monitors and glucose meters. Additionally, the 24LC025T/ST memory device can be used in communication and networking equipment such as modems and routers.

Working Principles of the 24LC025T/ST

The 24LC025T/ST device uses the Serial Peripheral Interface (SPI) protocol to communicate and store data from the memory device. This protocol uses a four-wire ‘synchronous serial data-link’ to write data to and read data from the device. The interface consists of four signal lines: a serial clock (SCLK), a slave select (SS), and serial data in (SI) and serial data out (SO). The device is enabled when the SS line is pulled low. Data is then clocked in by the master device on the SCLK line using the SI line to write data to the memory, while the SO line is used to read data from the device.

The 24LC025T/ST can store up to 2 Kilobytes of data and it is broken down into 128 pages each containing 16 bytes of data. The Memory organization of the 24LC025T/ST device is shown in the figure below.

For write operations, the master must first input the memory address in the memory device followed by the data. The SCLK line is then moved to the ‘write’ state and the data is written to the memory device. A ‘write complete’ status flag is then asserted and the SCLK is moved back to the ‘idle’ state. For read operations, the master must input the memory address followed by a ‘read’ command. The data is then moved to the SO line for the master to read. The SCLK is then moved back to the ‘idle’ state.

The 24LC025T/ST is a highly efficient and reliable memory device and it is used in a variety of applications. From the automotive industry to medical devices, the 24LC025T/ST memory device can reliably and securely store data that is important and sensitive. The Serial Peripheral Interface (SPI) protocol allows it to communicate with the host device reliably and consistently.

The specific data is subject to PDF, and the above content is for reference