24LC08BHT-E/OT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is a key configuration of digital electronic components, and is used for storage and operation of computer instructions or data. The 24LC08BHT-E/OT is a 8K-bit (1K-byte) EEPROM used in a variety of applications, providing a wide range of applications and working principles.

The 24LC08BHT-E/OT is a CMOS device, using a simple two-wire serial interface to exchange data with associated circuitry. It provides 8192 bits of internally organized 8-bit data in a small 8-pad SOIC package. It also features a low-voltage and power-down option and is optimized for use in low-power, mobile, battery-powered applications.

Operating with a single power supply, the 24LC08BHT-E/OT supports a wide voltage range from 2V to 5.5V. The device is a serial EEPROM, capable of reading or writing 8- or 16-bit words, at rates of up to 10Khz and is organized as 1024 words of 8-bit or 512 words of 16-bit each. It is ideal for applications that require frequent or multiple reads and writes, and also provides automatic, self-timed, low-power write cycles.

In typical applications, write operations are triggered by the rising edge of the device\'s Write Enable (WE) pin: logic HIGH to enable writes, logic LOW to disable them. All address and data must be available and valid prior to this rising edge. Following the rising edge, their write timing circuit generates the proper write pulse and ensures that the write cycle begins before the master device releases the bus.

When the 24LC08BHT-E/OT is used for writing to an address, the bit corresponding to the address will be written data in the address. A single write can store 1 to 16-bits of data, and up to 256 sequential locations can be written in a single, self-timed write operation. Writing can be done using a high speed mode with higher clock frequencies, or in a low speed mode, with lower clock frequencies.

On the other hand, reading operations take place when the device\'s Read Enable (RE) pin is activated to logic HIGH. Once enabled, the device can begin to transfer data serially on the SDA line. In both the read and write operations, the 24LC08BHT-E/OT is interfaced using the Serial Data (SDA) and Serial Clock (SCL) pins. The device also supports various types of user-programmable protection and security features.

Application fields for the 24LC08BHT-E/OT are varied, as this device can be used for a wide range of applications. These include medical and consumer electronics, automotive, industrial, consumer appliances and even military applications. As a single-chip device, the 24LC08BHT-E/OT provides an ideal solution for storing and retrieving data in these applications.

The 24LC08BHT-E/OT provides a reliable memory solution for a variety of applications. Given its wide range of power and speed options, coupled with its reliable security features, it is increasingly becoming the go-to device for many different applications. With its wide application field, reliable working principle and simple interface, the 24LC08BHT-E/OT provides a great starting point for engineers looking to explore various memory solutions.

The specific data is subject to PDF, and the above content is for reference