24LC128-I/SN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24LC128-I/SN is a memory IC developed by Microchip, a released series of EEPROMs for industrial and commercial applications. Its main features include an extended read/write range, the ability to withstand temperatures up to 125 deg C, and a low voltage operation that requires only 1.8 volts. This device is perfect for data logging, controlling of equipment, and storing configurations and backup data to enable quick recovery in case of power failure.

The 24LC128-I/SN has a total of 8K bytes of storage spread out over 16 pages and each page can store up to 256 bytes of data. It also has a self-timed write cycle, meaning that the 24LC128 does not require external delays and can write data without interruption. In addition, the chip also has a maximum write cycle of 1 million write cycles.

The 24LC128-I/SN is mainly operated via a two wire serial interface using either a UNI/O or I2C protocol. This protocol allows multi-byte operations either sequentially or randomly as desired. The write cycle is initiated by the master device, while the 24LC128-I/SN, as a slave, sends an acknowledge bit to indicate that it has received the write command.

The read cycle is executed by the master sending out a start condition, followed by the address of the device along with a write command. The 24LC128-I/SN then sends out a acknowledge signal to indicate that it has received the command and the master then sends a stop signal.The master then initiates a start condition, followed by the address of the device along with a read commands. The 24LC128-I/SN then sends out the requested data followed by an acknowledge signal and a stop signal.

The 24LC128-I/SN is applied in various industrial and commercial applications such as motor control systems, data logging, automotive control electronics, consumer electronics, and industrial automation. It is mainly used for system speed configuration settings, data logging, sensor monitoring, and process automation. These applications rely on the 24LC128-I/SN for its superior write cycle, its high endurance, and its low power requirements.

The 24LC128-I/SN is a robust memory device which is ideal for industrial and commercial applications due to its extended read/write range, temperature tolerance, and low voltage operation. It operates via a two wire serial interface and features a maximum write cycle of 1 million writes cycles. The 24LC128-I/SN is versatile, as it can be used in motor control systems, data logging, automotive control electronics, consumer electronics, and industrial automation.

The specific data is subject to PDF, and the above content is for reference