2506033007Y0

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Filter Type:	Signal Line
Number of Lines:	1
Current Rating (Max):	400mA
DC Resistance (DCR) (Max):	100 mOhm
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	0603 (1608 Metric)
Mounting Type:	Surface Mount
Height (Max):	0.037" (0.95mm)
Size / Dimension:	0.063" L x 0.032" W (1.60mm x 0.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Ferrite Beads and Chips are current-limiting devices that are often used in electronic circuits. They can be used to reduce or eliminate undesirable electrical noise caused by changes in high-frequency current or magnetic fields. One type of these devices is the 2506033007Y0, which has specific application fields and a defined working principle. This article aims to explain the application field and working principle of the 2506033007Y0.

Application Fields

The 2506033007Y0 is specifically used to control and prevent interference and overvoltage on digital circuits such as computers, medical equipment, and automotive electronic control units. It works as a decoupling device in a power supply circuit that is connected to different kinds of electronic modules. It is also used as an EMC filter for high-frequency circuits where high-frequency signals such as clock signals, bus signals, and waveguide signals need to be filtered and or dampened.

Working Principle

The 2506033007Y0 operates through the use of the E-field, D-field, and joule heating effect. The E-field is the electric interaction between two bodies and the D-field is the magnetic field generated by a current flowing through a wire or circuit. The joule heating effect occurs when an electric current passes through a resistance in a circuit. The operation of the 2506033007Y0 begins when a high frequency current passes through the device. The electric field produced by the current will induce an equal and opposite electric field in the ferrite chip. This electric field will interact with the magnetic field generated by the current and create a Faraday cage that shields the circuit from external interference. The electric field is also responsible for generating a joule heating effect, which dissipates the energy of the disturbances and prevents them from entering the circuit.The 2506033007Y0 also acts as an inductor that limits the voltage and current in the system. The device works as a low pass filter that only allows signals of a certain frequency and higher to pass through it. The higher frequencies are blocked, which helps to prevent interference and overvoltage on the system.

Conclusion

The 2506033007Y0 Ferrite Beads and Chips is an effective device for controlling and eliminating interference and overvoltage on digital circuits. It works by utilizing E-field, D-field, and joule heating to create a Faraday cage that shields the circuit from external disturbances. It is also effective at limiting voltage and current in the system and as a low pass filter for blocking higher frequencies.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description