2506036008Y0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads And Chips

Ferrite beads and chips are electronic components that can help to reduce noise and EMI (electromagnetic interference) in electronic circuits. They can also be used to filter out unwanted signals, such as radio frequency interference (RFI) from the power supply or from other components in the circuit.

2506036008Y0 Application Field and Working Principle

The 2506036008Y0 ferrite bead is a two-terminal device consisting of an unmagnetized ferrite core and a conductive loop, such as a thin copper wire. It is mainly used to reduce the coupling of noise between two impedances of the same order of magnitude. The ferrite bead is usually installed near or on the component or wire that transmits the signal that needs to be attenuated. The bead works by inducing a high-frequency current in the ferrite core, which acts as an inductor and so dissipates the energy from unwanted frequencies.

The working principle of a 2506036008Y0 can be demonstrated using a basic example. If the power supply is generating noise, the 2506036008Y0 ferrite bead can be installed around the wire that runs from the power supply to the circuit board in order to reduce the coupling of the noise from the power supply. As the noise travels along the wire and passes through the ferrite bead, the high-frequency current induced in the core dissipates the energy from the unwanted frequencies. This reduces the amount of noise that is able to reach the circuit board and, therefore, the amount of noise that can be picked up by other components in the circuit.

2506036008Y0 ferrite beads are used in a wide range of applications, from simple consumer electronics such as radios and TVs to complex systems such as robotics and medical equipment. They are also commonly used in automotive, home automation, telecommunications, military, and aerospace industries. Because they can be used in so many different applications, they are often the most cost-effective way to reduce noise and EMI in electronic circuits.

The specific data is subject to PDF, and the above content is for reference