25AA160D-E/P

Series:	--
Packaging:	Tube
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	16Kb (2K x 8)
Clock Frequency:	10MHz
Write Cycle Time - Word, Page:	5ms
Memory Interface:	SPI
Voltage - Supply:	1.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	25AA160D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<div><h3>Memory</h3><p> 25AA160D-E/P is an EEPROM from Microchip Technology, the notorious American semiconductor maker. This chip type is a serial EEPROM that comes with 16K bits of memory. It is available in two packages, 8-pin and 6-pin, that both provide SPI, QSPI, and SMBus serial interfaces.</p><p>The 25AA160D-E/P can be used for a variety of applications. It is frequently found in many embedded applications, such as car electronics, home security systems, industrial automation, and medical devices. This chip type can also be used in factory automation applications, such as motor control and latching relays.</p><p>The working principle of the 25AA160D-E/P is based on the Serial Peripheral Interface (SPI). This is a synchronous serial communications protocol between devices, and it allows for communications between multiple devices placed on the same bus. The 25AA160D-E/P is based on this protocol.</p><p>The 25AA160D-E/P is capable of transferring data at up to 1 Mbps, and it supports several different types of operations. These include writing and reading data and instructions, as well as executing instructions. The 25AA160D-E/P has an address counter feature that allows it to address data in 8-bit words or 16-bit words.</p><p>To initiate communication, the 25AA160D-E/P chip requires 8 bits of data. This data consists of a start bit, an address register, a write data register, a read data register, and a control register. The 25AA160D-E/P also requires a clock signal to initiate the data transfer. The 25AA160D-E/P is capable of transferring data in two different modes: single-bit mode and burst mode. In single-bit mode, only one bit is transferred at a time, whereas in burst mode, multiple bits are transferred at the same time.</p><p>The 25AA160D-E/P also supports several different commands such as “write”, “read”, “erase”, “program”, and “block erase”. It also supports several safety features, such as a write protection register, an address counter register, and an auto-load register. The 25AA160D-E/P also supports auto-increment and auto-decrement commands, which make it easier to access data.</p><p>In summary, the 25AA160D-E/P fromMicrochip Technology is an EEPROM capable of handling various applications in embedded systems and factory automation. It is built with an SPI interface and supports several commands. This chip type is capable of transferring data at high speeds, and provides several features for safety and convenience.</p></div>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description