25AA640XT-I/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an important component in electronic technology, as it stores and explains information. One example of a memory is the 25AA640XT-I/ST. This is a non-volatile serial EEPROM which is manufactured by Microchip Technology. It has a wide range of applications and uses a particular working principle which makes it especially suited for certain uses.

The 25AA640XT-I/ST is a memory chip with an 1Mbit (8K bytes) capacity. It has a 25MHz clock speed, and a page size of 32 bytes. It is designed to be used in conjunction with Microchip’s low-power nanoWatt XLP series of microcontrollers. This chip operates at a supply voltage between 1.8V and 5.5V. It can be used to store data which needs to be retained even when the power is switched off (non-volatile memory).

This type of memory is often used in embedded systems, such as those used in medical equipment and communications systems. In these applications, it is important that the data stored on the chip is not lost when the power is switched off. The 25AA640XT-I/ST is well suited to these applications as it has a very low standby current. This means that it uses very little power when in standby mode, making it ideal for use in battery powered or other systems where power consumption is important.

The 25AA640XT-I/ST operates using a Serial Peripheral Interface (SPI). This interface allows data to be transferred between the chip and the microcontroller. The chip is connected to the microcontroller via a data bus and 4 control lines. The data bus is used to transfer the data, while the control lines are used to control the transfer. The chip can be read from or written to using the SPI protocol.

In order to read from the chip, a command is issued via the control lines. This command specifies which page in the memory to read from. The data from the specified page is then transferred across the data bus. The data can then be either processed directly by the microcontroller, or stored for later use. Writing to the chip is slightly more complicated, as the data must first be written to a RAM buffer, before being transfered to the memory.

The 25AA640XT-I/ST is a versatile and power efficient memory chip which is well suited to embedded applications where non-volatile memory is required. Its small size, low power consumption and ease of use make it an ideal choice for many applications. Its use of the SPI protocol means that it can be easily integrated into existing systems. It is a memory chip which is well worth considering for your next embedded project.

The specific data is subject to PDF, and the above content is for reference