25BP30-Q-2-12F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are used in many industrial and commercial applications as sensing devices to count and convert mechanical action into electrical signals. In some cases, they are used to measure distance, speed, or position. The 25BP30-Q-2-12F is an incremental optical encoder designed for a variety of applications, including motors, conveyors, and positioning systems.

Description of 25BP30-Q-2-12F
The 25BP30-Q-2-12F is a compact, low-profile encoder that has a diameter of 25mm, a depth of 12mm, a mount type of 4-M3 studs and timing, and an optical scanning resolution of 30 counts per revolution. The encoder also has a built-in index that produces a pulse output when an object lines up in the accurate position. It has an electrical interface of open collector output, a supply voltage of 5 to 24V DC, a current draw of 20mA, a line driver type of push-pull output, a break resistance of 0.4 kilohms, a contact resistance of 4 max, and an operating temperature range of -20 to +85 Celsius.

Working Principle
The 25BP30-Q-2-12F works by detecting the movement of an object relative to a sensor. The encoder sends an electrical signal to the circuit board with each revolution of the object. This information is then used to determine speed, distance, or position. The encoder is composed of an optical disk, a light source, and a receiving device. The disk has alternating opaque and transparent disks which form a pattern. When the disk rotates, the light source shines through the transparent discs. The receiving device, usually a photosensor, detects the pattern and sends electrical pulses to the control system.

Applications
The 25BP30-Q-2-12F is widely used in industrial and commercial applications. It can be used to measure the speed and position of a rotating shaft, to monitor the distance of a linear conveyor system, or to measure the angle of an overhead crane. In factories, it is used to detect movement in robotic arms, conveyor belts, and packaging equipment. It is also used to monitor the positioning and speed of cranes, motors, and pumps. The 25BP30-Q-2-12F can be used in many other applications, including robotics, medical equipment, and motor-driven systems.

Summary
The 25BP30-Q-2-12F is an incremental optical encoder designed for a variety of applications, including motors, conveyors, and positioning systems. It works by detecting the movement of an object relative to a sensor and sending an electrical signal to the circuit board with each revolution of the object. The encoder is widely used in a variety of industrial and commercial applications, including robotics, medical equipment, and motor-driven systems.

The specific data is subject to PDF, and the above content is for reference