25LB22-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are devices used in automation, robotics and medical applications to measure and report position. They are fundamentally transducers, which are devices that convert one form of energy into another or that sense physical parameters and produce a signal in response. The 25LB22-H is a type of encoder, combining a small size and economical construction with the capacity to accurately encode position of moving objects.

Construction of the 25LB22-H

The 25LB22-H is constructed with a driving shaft, or body, which is connected to a rotating hub. It uses an alternating lighting arrangement, where the light-emitting diode (LED) used for encoding the position is located on one side of the hub and a fixed or stationary light-sensitive diode (LPD) is situated on the other side. To measure the position of the rotating hub, the 25LB22-H contains an encoder wheel with identifying marks, a hub, and a shield. It is, therefore, able to accurately measure the speed and angle of any surface within its rotating range.

Application of the 25LB22-H

The 25LB22-H is used in many industrial applications, as its small size and low cost make it a useful device for any type of motion sensing need. It is commonly used to measure the speed and acceleration of machinery and equipment, as well as provide data on angular position. As an example, it has wide application in robotics, where it is used to accurately measure speed and angle of robot arms and robot joints. It is also used in medical applications, such as surgery FOV measurement tools and laser tracking systems, where accuracy and precision are essential.

Working Principle of the 25LB22-H

The 25LB22-H uses a photodetection principle to detect the rotating position. Essentially, the device compares the intensity of two LEDs located on alternate sides of a rotating shaft. As the shaft rotates, the relative intensity of light detected by the LPD changes, producing an alternating light pattern that is used to calculate the angular position of the shaft. This alternating light pattern is then sent to the encoder, which reads and interprets the pattern, providing a digital number corresponding to the angle of the shaft. This number is then used to calculate the speed and position of the rotating hub.

Conclusion

In conclusion, the 25LB22-H is a useful and cost effective encoder suitable for various applications. Its small size, economical construction and photodetection measurement enable it to accurately and precisely measure speed and angle of any rotating surface, making it ideal for use in automation, robotics and medical applications.

The specific data is subject to PDF, and the above content is for reference