Allicdata Part #: | 1189-2137-ND |
Manufacturer Part#: |
25PZA220M10X13 |
Price: | $ 2.18 |
Product Category: | Capacitors |
Manufacturer: | Rubycon |
Short Description: | CAP ALUM POLY 220UF 20% 25V T/H |
More Detail: | 220µF 25V Aluminum Polymer Capacitor Radial, Can 2... |
DataSheet: | 25PZA220M10X13 Datasheet/PDF |
Quantity: | 398 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 1.97550 |
10 +: | $ 1.59480 |
100 +: | $ 1.24384 |
500 +: | $ 0.92492 |
1000 +: | $ 0.86114 |
2500 +: | $ 0.82924 |
5000 +: | $ 0.82620 |
Series: | PZA |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Type: | Polymer |
Capacitance: | 220µF |
Tolerance: | ±20% |
Voltage - Rated: | 25V |
ESR (Equivalent Series Resistance): | 26 mOhm |
Lifetime @ Temp.: | 3000 Hrs @ 105°C |
Operating Temperature: | -55°C ~ 105°C |
Ratings: | AEC-Q200 |
Applications: | Automotive |
Ripple Current @ Low Frequency: | 140mA @ 120Hz |
Ripple Current @ High Frequency: | 2.8A @ 100kHz |
Lead Spacing: | 0.197" (5.00mm) |
Size / Dimension: | 0.394" Dia (10.00mm) |
Height - Seated (Max): | 0.571" (14.50mm) |
Surface Mount Land Size: | -- |
Mounting Type: | Through Hole |
Package / Case: | Radial, Can |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum - Polymer Capacitors are the most commonly used capacitors in the world. Most often used in the electronics industry to store and control electrical energy, they are used in many applications from consumer electronics to power transmission. And 25PZA220M10X13 is one of them.
Applications
The 25PZA220M10X13 Aluminum - Polymer Capacitors are used to store and control electrical energy in a variety of applications. Their most common uses include:
- Cell phone charging circuits
- Speaker systems
- Smart grids
- Vehicle audio components
- Photovoltaic (PV) systems
- Marine and avionics systems
- Television and radio transmitters
- Power supplies and power grids
The 25PZA220M10X13 Aluminum – Polymer Capacitors can also be combined with integrated circuits such as voltage regulators, inverters, and power management systems to provide more advanced electronic system designs.
Combined with Other Components
The 25PZA220M10X13 Aluminum – Polymer Capacitors can be combined with other components such as resistors, inductors, and diodes to create more complex circuits. For example, two Aluminum – Polymer Capacitors and one resistor can be used together to create a voltage divider circuit, which can be used to provide a DC reference voltage. In addition, they can be used in conjunction with other capacitors to increase the capacitance of a circuit.
Working Principle
An Aluminum - Polymer Capacitor works by storing electrical energy as an electrical field between two conducting plates. These capacitors are usually comprised of two parallel plates with a layer of insulating material in between them, such as Aluminum Oxide or Polyethylene. When a voltage is applied across the terminals of the capacitor, a charge accumulates on the plates proportional to the applied voltage. This stored electrical energy, which is proportional to the voltage of the capacitor, can then be released when the voltage is removed.
When the voltage is removed, the charge on the plates of the capacitor starts to dissipate in the form of a current. This current decreases as the charge on the plates decreases, until eventually the capacitor is completely discharged. The rate at which the charge dissipates is dependent on the capacitance and the resistance of the circuit in which the capacitor is connected.
Pros and Cons
One of the advantages of using the 25PZA220M10X13 Aluminum - Polymer Capacitors is their small size. The small size allows them to be used in applications where space is limited. They also have a high temperature rating and a very rapid charge/discharge time. Additionally, they have relatively stable electrical properties, making them well-suited for a wide variety of applications.
The main disadvantage of Aluminum - Polymer Capacitors is their high cost compared to other types of capacitors. However, when used in applications requiring high power, their performance and reliability make them worth the additional investment.
Conclusion
The 25PZA220M10X13 Aluminum – Polymer Capacitor is an ideal choice for applications requiring both high power and a small size. They can be used in a variety of applications from consumer electronics to power transmission. As with all capacitors, they do have some drawbacks such as their relatively high cost. But, for applications requiring high power and a small size, the 25PZA220M10X13 Aluminum – Polymer Capacitor is an excellent choice.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CIR020R-24A-25PZ-F80-VO | ITT Cannon, ... | 41.92 $ | 190 | CONN RCPT HSNG MALE 25POS... |
25PZF220M8X9 | Rubycon | 0.81 $ | 1283 | CAP ALUM POLY HYB 220UF 2... |
25PZF330M10X9 | Rubycon | 0.9 $ | 1708 | CAP ALUM POLY HYB 330UF 2... |
25PZE330M10X9 | Rubycon | 0.94 $ | 1202 | CAP ALUM POLY HYB 330UF 2... |
25PZA220M10X13 | Rubycon | 2.18 $ | 398 | CAP ALUM POLY 220UF 20% 2... |
25PZA120M8X12.5 | Rubycon | 1.67 $ | 491 | CAP ALUM POLY 120UF 20% 2... |
25PZE220M8X9 | Rubycon | 0.79 $ | 588 | CAP ALUM POLY HYB 220UF 2... |
25PZA100M8X10 | Rubycon | 1.47 $ | 181 | CAP ALUM POLY 100UF 20% 2... |
25PZA180M10X10 | Rubycon | 1.14 $ | 1000 | CAP ALUM POLY 180UF 20% 2... |
CAP ALUM POLY 120UF 20% 35V T/H120F 35V ...
CAP ALUM POLY 560UF 20% 4V T/H560F 4V Al...
CAP ALUM POLY 560UF 20% 6.3V T/H560F 6.3...
WCAP-PSHP ALUMINUM POLYMER CAP100F 35V A...
CAP ALUM POLY HYB 330UF 25V SMD330F 25V ...
CAP ALUM POLY 82UF 20% 2.5V SMD82F 2.5V ...