26PCAFJ3G

Series:	26PC
Part Status:	Active
Pressure Type:	Compound
Operating Pressure:	±1 PSI (±6.89 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 16.7 mV (10V)
Accuracy:	±0.5%
Voltage - Supply:	2.5 V ~ 16 V
Port Size:	Male - 0.07" (1.78mm) Tube
Port Style:	Needle
Features:	Temperature Compensated
Termination Style:	PC Pin
Maximum Pressure:	±20 PSI (±137.9 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	4-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

Pressure sensors and transducers are versatile devices used to measure a wide range of pressure frequencies and sensitivity levels. They are the most common type of sensor used to measure pressure readings in a variety of applications. This article will focus on the 26PCAFJ3G sensor and transducer and its applications and working principles. The 26PCAFJ3G is a general purpose pressure transducer that can measure low to medium pressures. It can be used in applications such as pressure transducer with accuracy up to 0.25%. It uses a flat spring diaphragm that has a low static error accuracy. The sensor uses a quartic curve compensation technique which improves the stability due to temperature sensor changes. The transducer is a sealed-type device that features a stainless steel wetted parts and Non-Contact Resistor (NCR) technology.In terms of its application field, the 26PCAFJ3G is mainly used for general pressure measurement applications such as industrial process control, machine, production control, and measurement of liquid levels. It is a reliable sensor for a wide range of general applications due to its accuracy, reliability, and ease of operation.The working principle of the 26PCAFJ3G sensor and transducer is based on the type of transducer. It uses a sensing element that converts the pressure into a voltage output. The output of the transducer can be measured and monitored by a potentiometer or a controller. The sensing element of the sensor is made up of a flat spring diaphragm that is bimetal. The diaphragm is normally in a tensioned state and is surrounded by a thin protective film. When there is a change in pressure, the diaphragm expands or contracts and this results in a change in the resistance of the bimetal. This change is then converted into a voltage output which can be measured.The 26PCAFJ3G Pressure Sensor and Transducer also has a calibration feature that allows for precise readings. The calibration of the sensor is done by adjusting the sensitivity of the bimetal which in turn adjusts the output voltage. The sensitivity of the sensor can be set according to the desired pressure level that is to be measured.In conclusion, the 26PCAFJ3G is a reliable sensor and transducer with a wide range of applications. It is a versatile device that has an accuracy of up to 0.25%. It features bimetal and flat spring diaphragm and utilizes the Non-Contact Resistor (NCR) technology. It is mainly used for general pressure measurement applications such as industrial process control, machine, production control, and measurement of liquid levels. It also has a calibration feature that allows for precise readings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description