280612-2

Headers, Male Pins, 280612-2

Headers and male pins are typically made of plastics such as polycarbonate, Ultem, or PBT. This type of connector is made with two or more rows of pins in a single housing. The pins are often shaped with a glass or composites insert encapsulation that is then filled and cured to provide an added strength. The connectors also are designed to provide electrical isolation between the two side of the connection.

Application Field

The 280612-2 application fields are typically in embedded system, such as IoT (Internet of Things), Industrial Automation, Computer, Telecommunications, and Sectored Networking.

Working Principle

The connector\'s housing is designed to house two rows of pins in a single housing, allowing the wires to be connected to the connectors. The pins are then connected to the respective terminals on the connector using a screw or tab which is crimped onto the wire. The connection is then insulated and sealed with a waterproof sealant. The pins are then tested for continuity and stress level.

The connection between the two sides is secured using a locking mechanism, allowing the male connector to be inserted and locked into place. The locking mechanism ensures that the connection between the two sides remains permanently in place and is reliable. The connector can then be disconnected by pushing the disconnect tab, allowing the connection to be safely removed.