2903176

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electronic switching components, which are suitable for use in applications where electrical isolation between input/output signals is necessary. They are widely used in automation systems, industrial environments and consumer applications.

2903176 is a type of SSR, which comes in various input types (DC, AC and combination) and can be configured to meet specific operating requirements. The basic working principle of this type of SSR is based on a solid-state circuit operating at high frequencies for controlling, switching and/or regulating an AC load, while providing electrical isolation between the input signals and the output signals.

The 2903176, in its DC/AC configuration, is composed of a MOSFET device (Gate), a voltage regulator circuit (Voltage Substrate) and a clip-on ferrite device (Clip). The MOSFET device is used to control the switch from off to on and off again, while the voltage substrate isolates the control circuit from high-voltage transients. The ferrite device clips on to create an inductive effect for lower firing voltages and remote On/Off control.

The 2903176 is highly versatile and can be used in a variety of applications. For example, it can be used in lighting systems and motor control, either as a single-phase or three-phase SSR. It can be configured as a leading-edge or trailing-edge SSR and can also be modified to work with low-voltage signal lines. It is also suitable for use in various industrial environment applications such as variable frequency drives, HVAC systems, robotics, and process control.

In addition, the 2903176 is designed for use with various load types, including resistive, inductive and capacitive loads. This SSR\'s input circuits are designed to be driven by various standard logic levels, both DC and AC and can be connected in series to increase current ratings of any standard SSR output circuit. It also features low switching times compared to other SSRs, minimizing the time to switch the load.

2903176 is designed to provide an optimum balance between performance and cost-effectiveness. It can be adapted to virtually any industrial or consumer application needing cost-efficient, reliable switching and isolation.

The specific data is subject to PDF, and the above content is for reference