293D106X0035C2TE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are capacitors that use tantalum as the electrolyte, instead of other materials like aluminum. These capacitors are used to filter and provide power supply in radio frequency (RF) circuits, thus protecting the circuit components from damage or interference. The 293D106X0035C2TE3 capacitor is a type of tantalum capacitor specifically used in RF circuits. It is a surface mount capacitor that is used to provide performance and stability in the circuit, thus helping to reduce or eliminate RF interference or noise.

This tantalum capacitor has a maximum capacitance value of 10 microfarads (µF) and operates at a maximum temperature of 85°C with an applied voltage of 6.3 volts. The capacitor has an ESR of 0.0004 Ohms at 1kHz frequency, a value which is relatively low for a capacitor of this size. This makes it suitable for operation at high frequencies, thus providing a higher level of performance in RF circuits.

The 293D106X0035C2TE3 capacitor is a good choice for high frequency applications because it has a very low ESR and a high Ripple Current (RI) rating - it is rated to withstand a maximum current of 0.4 Amps. It also has a surge current rating of 0.6 Amps, so it can be used in circuits that are subject to transients or sudden surges of current.

In addition to its low ESR and high RI rating, the 293D106X0035C2TE3 tantalum capacitor also has low internal series resistance (ISR) which is less than 0.003 Ohms, making it highly suitable for applications that require a low level of power dissipation. This makes the capacitor suitable for use in systems where energy efficiency is paramount.

The 293D106X0035C2TE3 is a popular capacitor for use in circuits that require high performance, due to its low ESR and high RI rating. It also offers an efficiency of 85%, ensuring that the circuit is not overly dissipating power. This makes it a good choice for use in applications such as RF circuits, radio receivers, transmitters, and low voltage power supplies.

The working principle of the 293D106X0035C2TE3 capacitor is the same as that of any other capacitor, in that it works by storing charge and releasing it when needed. The stored charge is held in an electrolytic ‘gel’ that is present between two conducting plates which are separated by an insulating material. When a potential difference (voltage) is applied across the two plates, a current flows through the capacitor, which is proportional to the applied voltage.

When the applied voltage is removed, the capacitor stores a charge, which it will keep until the voltage is once again applied. This means that the 293D106X0035C2TE3 capacitor can be used for both filtering and providing power supply in RF circuits, providing protection for the other components in the circuit. This makes it a highly reliable and efficient component for RF circuit applications.

The specific data is subject to PDF, and the above content is for reference