2967633 Relays

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays are widely used in power and control applications that require a load over 2 Amps to be switched on or off. An important point to consider when selecting a power relay is the operating voltage requirements of the circuit and load being controlled. Some power relays will have a variety of configurations to accommodate either alternating current and/or direct current.

The 2967633 power relay is a robust switching device featuring a time saving snap-in mounting bracket and low profile design. It uses a 5amp double-pole double-throw (DPDT) configuration and has a switching voltage of 110V-120V AC. This power relay is designed specifically for low power applications and is suitable for UL listed applications. The 2967633 is a long life device and has a dielectric strength of 800V.

The 2967633 power relay consists of a coil, contacts, and an actuator. The coil is the main element that controls the power relay operation. It is made of a metal such as copper or iron and is connected to a voltage source to create a magnetic field when the relay is energized. The contacts are pieces of metal that are closed during normal operation. When the relay is energized, it opens the contacts, allowing the load to be switched on or off. The actuator is an electromechanical device that moves the contacts to open or close them.

The 2967633 power relay has three main operating modes: make and break, latching, and momentary action. Make and break are the most commonly used type, where the contacts open and close with each energization of the coil. Latching type involves an electrical impulse to open the contacts and another electrical impulse to close them. Momentary action is when the relay is energized only for an instant, such as to initiate an event or indicate a condition. The 2967633 also has an optional plug-in type current sensing auto and manual reset circuit.

The switching frequency of a 2967633 power relay is dependent on the inductance of its coil and the type of switch it is controlling. Higher inductive loads can cause the relay to open and close slower, while high resistances can speed up the response. The coil resistance must be considered before selecting a power relay for any application.

The 2967633 power relay is an ideal choice for applications that require a reliable switching device with fast response time and long lifespan. It is available in a variety of different configurations depending on the circuit and load being controlled. With its low profile design and solid construction, the 2967633 is sure to meet the needs of most power and control applications.

The specific data is subject to PDF, and the above content is for reference