299D106X9035DB1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors are widely used in electronic circuits. They offer a number of advantages over other types of capacitors as they are lightweight, smaller in size, have higher capacitance, provide greater stability, and have a longer life span. A tantalum capacitor is a type of capacitor with a tantalum anode and oxide electrolyte. It is mostly used for decoupling of high frequencies in analog applications. This article will discuss about the application field and working principle of the 299D106X9035DB1 tantalum capacitor.

Application Field

The 299D106X9035DB1 is a small size, high capacitance, low-impedance tantalum capacitor. It has a capacitance value of 4.7 μF and is rated for up to 25 volts DC. It is used in a number of applications, such as:

• Power supply decoupling
• Input and output filters
• Timing and control circuits
• Pulsed and switched loads
• Noise suppression for signal conditioning

Tantalum capacitors are also used as a memory backup device in computers and laptops. This is also applicable for the 299D106X9035DB1 capacitor.

Working Principle

The 299D106X9035DB1 works on the same principle as all other tantalum capacitors. It has two anodes and one cathode connected to an insulating layer of tantalum oxide. The anodes are made of a highly conductive material such as sintered tantalum and the cathode is composed of a mixture of manganese dioxide and tantalum oxide. The anodes are connected to the positive and negative terminals of a power supply while the cathode is connected to ground. The capacitor stores electrical charge between the two anodes in the form of an electric field. This electric field is created when a voltage is applied to the capacitor.

When the applied voltage is removed, the capacitor slowly discharges its charge until it is completely emptied. This process is known as leakage current. The higher the capacitance value of the capacitor, the longer it takes for the capacitor to fully discharge.

Conclusion

Tantalum capacitors are versatile components that are used in a wide range of applications. The 299D106X9035DB1 is a small size, high capacitance, low-impedance tantalum capacitor that is used for power supply decoupling, input and output filters, timing and control circuits, pulsed and switched loads, and noise suppression for signal conditioning. It works on the same principle as all other tantalum capacitors and stores electrical charge between its two anodes.

The specific data is subject to PDF, and the above content is for reference