2A01GHA0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2A01GHA0G application field and working principle

Introduction: 2A01GHA0G is a Diode Rectifier Bridge Single device with low forward voltage drop, low reverse leakage current and stable temperature coefficient characteristics.

Application Field: It is widely used in AC-DC rectification, filtering, damping, clipper, peak voltage limiter, voltage-stabilizing, etc., and can be used for high frequency switching power supply, AC motor speed regulators, UPS systems and other DC power supply circuits.

Working Principle: The working principle of 2A01GHA0G is based on the principle of PN junction. The electric current on N-type material is relatively low and its electrons are in the state of free motion where as electric current on P-type material is relatively high because its electrons are bound to its atom. When the two sides are connected in a closed loop, electric current flows due to the difference in electric potential between them. It is equipped with two anodes at two ends of the bridge and two cathodes at the other two ends of the bridge, with each cathode at the same voltage potential as the corresponding anode. Under reverse voltage, the diodes are non-conducting and no current can flow. This mode is called “blocking state”. While under the forward voltage, the electric field generated by the voltage exceeds the PN junction barrier level, which makes it in the conducting state and the current flows.

Conclusion: 2A01GHA0G as a Diode Rectifier Bridge Single device has many application fields, including AC-DC rectification, filtering and damping, etc. It adopts the working principle of PN junction, in which it is equipped with two anodes and two cathodes located at the two ends of the bridge and can operate in both blocking and conducting state.

The specific data is subject to PDF, and the above content is for reference