2C2324

Thyristors - SCRs, also known as Silicon Controlled Rectifiers, are solid state, electronic devices that switch an electrical current on and off in response to a trigger voltage. The 2C2324 is an SCR device that is used in a wide range of applications. This article will discuss the 2C2324 application field and working principle.The 2C2324 is an SCR that has a continuous current rating of 20A, and a peak rating of 30A. It is widely used in a variety of applications, including power control, motor control, switching power supplies, and the control of AC and DC machines. Its high thermal dissipation and low voltage capabilities make it especially useful in applications where a high degree of accuracy is required.The 2C2324 works on the principle of having a control voltage applied to the gate terminal of the device, which controls the flow of current through the device. The control voltage is applied to a silicon control rectifier (SCR) which is in turn connected to the anode of the device. When the voltage applied to the gate is greater than the “breakdown” voltage of the SCR, it triggers the 2C2324, allowing current to flow from the anode to the cathode.When the voltage voltage applied to the gate is below the break down voltage, the 2C2324 will remain nonconductive until the voltage is again greater than the breakdown voltage of the SCR, at which point the current will flow again. This process can be repeated as many times as required, allowing for precise control over the current flow.The 2C2324 can also be used to switch off electrical current by applying a negative voltage to the gate. This will cause the anode-cathode to become reverse-biased, and therefore turn off the SCR. This is useful in situations where the current must be switched off immediately.As the 2C2324 is an SCR device, it benefits from the ability to self-commutate, meaning that it can switch from an on to an off state without any external control circuit. This makes the 2C2324 a particularly useful device for applications where the need for a complex external control circuitry is not required.In conclusion, the 2C2324 is a versatile SCR device that is used in a variety of applications. It has a high peak current rating and low voltage breakdown, making it well suited to applications that require precise control. Its self-commutating capabilities allow it to switch on and off without the need for a complex external control. It is therefore a device of choice for a wide range of applications.

2C2323	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
2C2324	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
2C2325	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
2C2326	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
2C2328	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
2C2329	Microsemi Co...	0.0 $	1000	SCR SILICON CTRL RECTIFIE...
D3V-012-2C23-K	Omron Electr...	2.95 $	1000	SW SNAP ACT SPST-NC 100MA...
D3V-013-2C23-K	Omron Electr...	3.02 $	1000	SW SNAP ACT SPST-NC 100MA...
D3V-6G-2C23	Omron Electr...	1.74 $	1000	SWITCH SNAP ACT SPST-NC 6...
VX-5-2C23	Omron Electr...	2.97 $	100	SWITCH SNAP ACT SPST-NC 5...
VX-014-2C23	Omron Electr...	3.9 $	100	SW SNAP ACT SPST-NC 100MA...
D3V-01-2C23	Omron Electr...	1.61 $	1000	SW SNAP ACT SPST-NC 100MA...
D3V-6G-2C23-K	Omron Electr...	1.88 $	1000	SWITCH SNAP ACT SPST-NC 6...
D3V-015-2C23	Omron Electr...	2.09 $	1000	SW SNAP ACT SPST-NC 100MA...