2EZ43D5E3/TR12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2EZ43D5E3/TR12 Diodes - Zener - Single: Application Field and Working Principle

A diode is an electrical component that allows the current to flow in one direction while blocking it in the opposite direction. Zener diodes, also known as avalance diodes, are a special type of diode that allow the current to flow in both directions. The 2EZ43D5E3/TR12 diode is a single Zener diode with an average forward current of 5MA and peak forward surge current of 26.7mA. This diode is typically used in voltage regulation, signal clipping, rectifying and switching applications. This article examines the application of the 2EZ43D5E3/TR12 and its working principle.

Application of 2EZ43D5E3/TR12

The 2EZ43D5E3/TR12 diode is designed for flyback rectification, voltage regulation and transient voltage suppressor (TVS) applications. It is especially useful in high-frequency switched-mode power supplies and AC-dc converters. It is also used in spark suppression and switching applications in consumer electronics.

The 2EZ43D5E3/TR12 has a reverse breakdown voltage of 3.3V and a maximum reverse current of 5mA. It is rated for a surge current of 26.7mA, which allows it to handle high pulse currents without being damaged. Its small form factor allows it to fit into tight spaces, making it suitable for use in portable devices.

This diode is also suitable for use in high-frequency applications, as it has a low forward voltage drop, which minimizes power dissipation and improves efficiency. Its peak forward surge current rating of 26.7mA is also sufficient for most high-frequency applications. Additionally, its low capacitance ensures that it can handle high-frequency signals with minimal signal distortion.

Working Principle of 2EZ43D5E3/TR12

A Zener diode is characterized by a specific reverse breakdown voltage, which is why it is used for voltage regulation. It works on the principle of avalanche breakdown when the applied reverse voltage exceeds a certain value, usually referred to as the Zener voltage. When this happens, the diode breaks down and allows a large amount of current to flow in the reverse direction until the breakdown voltage is reached. This current is then regulated and can be used to power other components.

In the case of the 2EZ43D5E3/TR12, the breakdown voltage is 3.3V and the maximum reverse current is 5mA. When this diode is used in a circuit, the current must be limited to the breakdown voltage or less, otherwise the diode will be damaged. It is important to note that the diode should only be operated within its specified ratings and any voltages or currents outside of these ratings could cause permanent damage.

The 2EZ43D5E3/TR12 also has a low capacitance, which helps to reduce signal distortion. The low capacitance also increases switching speeds, allowing for faster switching times in applications such as inverters and power supplies.

Conclusion

In summary, the 2EZ43D5E3/TR12 diode is a single Zener diode with a reverse breakdown voltage of 3.3V and a maximum reverse current of 5mA. It is typically used for flyback rectification, voltage regulation and transient voltage suppression applications. The diode works on the principle of avalanche breakdown and its low capacitance ensures minimal signal distortion. This makes it well suited for use in high-frequency applications such as switched-mode power supplies and AC-dc converters. Overall, the 2EZ43D5E3/TR12 diode is a highly versatile component that can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference