2STA1694

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2ST1694 is a single bipolar transistor (BJT) widely used in various applications due to its wide range of features and capabilities. It is a medium power NPN transistor that has a collector-emitter breakdown voltage of 40V and maximum collector current of 800 mA. The 2ST1694 is also suitable up to 10MHz frequency which makes it a great choice for audio or radio frequency applications.

The 2ST1694 is most commonly used in switching circuits and other applications that require high-speed switching or amplification. It is also frequently used in low voltage and low current applications such as in battery plate amplifiers, radio receivers and similar circuits. Its rugged construction, high current output and low gain make this transistor the ideal choice for many different types of applications.

The 2ST1694\'s working principle is based on the basic operation of a bipolar transistor. It consists of three layers of semiconductor material, separated by two p-n junction diodes. The collector, base and emitter are the three terminals of the transistor. When a voltage is applied to the base, the current flowing through the device increases. This current flowing through the base-collector junction causes a corresponding increase in the current flow across the collector-emitter junction.

When the collector-emitter Junction is forward biased, the current increases and the 2ST1694 transistor becomes an active switch. The two p-n junction diodes form the two junctions of a silicon junction transistor (SJTA). The two diodes are responsible for controlling the base current of the 2ST1694, thereby controlling the collector current. The collector-emitter Junction is then forward biased and the collector current increases. When the collector current exceeds the base current, the transistor becomes active and the voltage at the collector-emitter Junction drops to near zero.

The 2ST1694 has the capability to operate in a variety of switching configurations. It can be used in both simple switched and regenerative switching configurations. A simple switched configuration requires a base drive signal to switch the transistor on and off, whereas a regenerative configuration requires a feedback loop that enables the transistor to switch on and off. The regenerative configuration has advantages over a simple switched configuration since it reduces the output capacitance of the transistor and increases the speed and efficiency of the switch.

The 2ST1694 can also be used in linear applications such as in amplifiers, linear audio power amplifiers, and Class D (high efficiency) audio power amplifiers. Its wide range of current capabilities make it suitable for a variety of linear applications. It is also frequently used in analog circuits requiring high current and low noise.

The 2ST1694 is an ideal low power and low voltage transistor that can be used in a wide variety of applications. With its broad range of features and capabilities, it is the ideal choice for many different types of projects. Its rugged construction, wide operating current and low power consumption make it an excellent choice for many different types of switching and linear applications.

The specific data is subject to PDF, and the above content is for reference