2STD2360T4

The 2STD2360T4 is a transistor, categorized within the Bipolar (BJT) family of single types. Transistors, in general, are small semiconductors that are capable of controlling a larger current or voltage based on a smaller current or voltage, respectively. Transistors, due to this ability to amplify an analog signal, are widely used in many applications and are one of the most important electronic components.The 2STD2360T4 has multiple uses, depending on its application. It can be used in power applications, such as motor control and power switching, as well as signal applications, such as amplifying audio systems. As a single type transistor, it acts as an on-off switch and is primarily used to control larger currents with smaller ones. The 2STD2360T4 operates by manipulating two different types of current. One is the collector current, and the other is the base current. These two currents are related through a current gain, known as the beta, or hfe of the transistor. This tells you how much current is passing through the collector for a given current in the base. When the base current is increased, the collector current also increases, with a fixed ratio. The 2STD2360T4 has a current gain ranging between 65 to 250. This means that the ratio of collector to base current can range from 65 to 250. This range varies depending on the transistor\'s brand and model, but they are usually within the same range. In addition to controlling current, the 2STD2360T4 also controls voltage. It is capable of amplifying AC voltages, and can be used to amplify both audio as well as radio signals. It also has a wide range of capabilities in terms of power switching. This makes it perfect for applications such as motor control and voltage regulation. In terms of its construction, the 2STD2360T4 is made up of two main parts - the collector and the base. The collector is where the majority of the current is passed through the transistor, while the base is responsible for controlling the flow of current through the collector. Both the collector and the base are connected to the outside world through three pins - the emitter, the base, and the collector. The base is connected to either a voltage source or a current source, while the collector is connected to either a load or an output device. In order to properly use the 2STD2360T4, it must be connected correctly. If it is connected incorrectly, it can cause damage to the device or reduce the overall efficiency. Overall, the 2STD2360T4 is an efficient and powerful transistor. It is capable of controlling large amounts of current with a small base current and also has a wide range of voltage amplification capabilities. It is widely used in both power and signal applications and is an essential component in many circuits.

2STD1665T4	STMicroelect...	--	7500	TRANS NPN 65V 6A DPAKBipo...
2STD1360T4	STMicroelect...	0.0 $	1000	TRANS NPN 60V 3A DPAKBipo...
2STD2360T4	STMicroelect...	0.0 $	1000	TRANS PNP 60V 3A DPAKBipo...