2STL1525

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2STL1525 is a bipolar (BJT) single, suitable for applications in the power field such as power switching, audio switching and general purpose switching, among others. It is also used in many applications as an audio amplifier and motor control. Its working principle is based on the fact that it is made up of two p-n junctions, namely the collector-emitter and the base-emitter junctions. These two junctions act as a pair of diodes, which, when biased correctly, allow current to flow through the transistor. This current is then amplified by the collector-emitter junction, and the output is taken from the collector.

The collector-emitter (C-E) junction is a reverse-biased diode. A reverse-biased junction allows very little current to pass, but if a certain voltage is applied to the base of the transistor, which forward-biases the base-emitter junction, the current will flow through the transistor. This current is then amplified by the collector-emitter junction. The output is taken from the collector terminal.

The base-emitter junction is a forward-biased diode. When a voltage is applied to the base, it will cause current to pass through the transistor. The collector voltage is much greater than the base voltage, thus allowing the transistor to amplify the base current. This is called the common-emitter (CE) configuration.

The 2STL1525 is a voltage-controlled device, meaning that the amount of current passing through the device is dependent on the amount of voltage applied to the base. If the voltage is increased, then the current will increase, but if the voltage is decreased, then the current will decrease. This is called the current gain, and it is expressed as a ratio of the collector current to the base current.

The 2STL1525 has a typical maximum power dissipation of 20W and a maximum operating temperature of 175°C. It also has an Absolute Maximum Rating (AMR) of 400V and a collector-emitter voltage (Vce) of 200V. It is also capable of handling high currents and has a high switching speed. It is available in various packages and is quite inexpensive, making it a popular choice among applications requiring a low cost transistor.

In summary, the 2STL1525 is a bipolar (BJT) single transistor which can be used in a variety of applications including power switching, audio switching and general purpose switching. It has a high switching speed and can handle high currents, while still being reasonably priced. Its working principle is based on the fact that it is made up of two p-n junctions, namely the collector-emitter and the base-emitter junctions, which act as a pair of diodes, allowing current to pass through the transistor when correctly biased. The 2STL1525 is thus an ideal choice for any application which requires a low cost, highly efficient power transistor.

The specific data is subject to PDF, and the above content is for reference