2TP66-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rocker switches are used to transfer an electrical current from one circuit to another. The type of rocker switch known as 2TP66-1 is a double-pole, double-throw switch with four terminals for connecting two circuits. It works by reversing the direction of current flow when it is activated. When it is turned off, it returns to its original position.

The 2TP66-1 rocker switch is a versatile and popular switch. It has two on-off positions, and it is suitable for a variety of applications in both commercial and residential settings. It is most commonly used to control lighting fixtures, as well as to activate or deactivate other electronic components such as motors and alarms.

The 2TP66-1 switch is a SPST (single pole, single throw) switch with four terminals. It features two opposed rocker arms that move up and down when the switch is pressed. Depending on which way the switch is pressed, it will open or close one or both circuits. This switch will also control the flow of current in one direction, meaning that it can be used to manage either AC or DC power.

In order to use the 2TP66-1 rocker switch, it must be wired properly. The terminals must be wired according to the approved wiring diagram, in order to avoid costly damage due to incorrect wiring. It is also strongly recommended to use the correct wire gauge for the amount of current being used. The switch should then be installed into an appropriate enclosure in order to ensure proper insulation and protection.

The 2TP66-1 rocker switch is an excellent choice for managing the power output of various electrical components. Its reversible current control, simple wiring requirements, and low cost make it an ideal switch for a wide range of applications. Whether you need to control a light fixture or activate a motor, the 2TP66-1 rocker switch has you covered.

The specific data is subject to PDF, and the above content is for reference