3020608 RF/IF and RFID

Series:	WE-LT
Part Status:	Active
Type:	Fabric Over Foam
Shape:	Rectangle
Width:	0.236" (6.00mm)
Length:	39.370" (1.00m)
Height:	0.315" (8.00mm)
Material:	Polyurethane Foam, Rayon Paper
Plating:	--
Plating - Thickness:	--
Attachment Method:	Non-Conductive Adhesive
Operating Temperature:	-40°C ~ 85°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:Radio frequency interference (RFI) and electromagnetic interference (EMI) are two types of interference that can occur in electronic communications and signals. RFI generally occurs between different frequencies while EMI is caused by electromagnetic fields. Both of these types of interference can cause errors in communication, data loss, or even total system failure. In order to reduce the effects of interference, equipment manufacturers and installers must make sure to use the appropriate contacts, fingerstock, and gaskets to protect electronic components.Contacts:Contacts are components used to close electric circuits and ensure that electric current flows through the system. They are also used to form connections between components, transfer signals, and protect components from electric shock. RFI and EMI contacts are specifically designed to provide protection against interference. Most of these contacts are made of high conductivity metals such as copper or silver, and they are available in a variety of sizes and shapes. RFI and EMI contacts are designed to shield components from excessive noise and minimize the interference caused by other components connected to the system.Fingerstock:Fingerstock is a special type of protective material used to protect electronic components from RFI and EMI. It is a flexible metal with a patterned exterior, which allows it to conform to surfaces and provide protection from interference. Fingerstock is available in various sizes, shapes, and levels of conductivity. It is often used in conjunctions with contacts to protect against RFI and EMI, as it can help to minimize the effects of interference by absorbing energy and reflecting it away from the components.Gaskets:Gaskets are another type of protective material that is used to protect components from interference. Gaskets are used to provide a physical barrier between components, which prevents the passage of electromagnetic fields. They are available in various sizes, shapes, and materials, and they are often used in combination with other means of interference protection, such as contacts and fingerstock.Conclusion:RFI and EMI are types of interference that can cause malfunctions and even system failure in electronic systems. In order to prevent these types of interference, manufacturers and installers must use appropriate contacts, fingerstock, and gaskets to protect components from interference. Contacts provide an electric connection and protection from electric shock, fingerstock absorbs energy and reflects interference away from components, and gaskets provide physical barriers that prevent the passage of electromagnetic fields. By using these components, manufacturers and installers can ensure that their systems are protected from interference and perform optimally.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description